cutting sections in Drafting Workbench
I am trying to figure out how to create cut lines in all section views so we can correlate the height difference between multiple views. I know with dynamic sectioning I can get body lines andreally like that feature however I would also like to do something similar in Drafting. I remember doing this in ug I have not been able to figure it out in catia v5.
so an example might be a car door and 3 section cuts through the interior door handle to show assembly position of interior panel door inner door outer and handles
2 cuts in yz plane and 1 cut in xz plane the lines might be at (1) x4100 y900 z1350 (2)x4150y900z1350 (3)(1)
in all 3 section cuts I would like the same 3 lines representing xyz so we can put together a gage .
thanks
1 Answer
There are many ways to add section views with CATIA Drafting. One way, is to first create the planes you described above. Create these planes in one of the parts that is instanced in your assembly. Then when adding the Section View, just switch to the assembly window and select one of the planes.
