Feed

bicycle frame analysis in ansys

Tutorial by Armin Yousefi Kanani
Small

1

  1. Step 1:

    connect other points to each other like this table.

  2. Step 2:

    meshing

  3. Step 3:

  4. Step 4:

    After doing like this picture you have to follow this path to turn on key point number this is vital for subsequent step.
    Utility Menu >> PlotCtrls >> Numbering >> Kp Keypoints
    than turn on numbering after that follow this path
    Utility Menu >> Plot >> keypoints >> keypoints

  5. Step 5:

    utility menu >> solution >> define loads >> apply >> structural >> displacement >> on keypoints
    1- choose 5,6 and choose apply
    2-DOFs to be constrained choose UY,UZ
    3- displacement value = 0
    4- choose 1
    5- DOFs to be constrained choose UY, UZ , UX

  6. Step 6:

    1-choose keypoints 3 for -600

  7. Step 7:

    choose keypoints 2 for -200

  8. Step 8:

    3

  9. Step 9:

    solve question

  10. Step 10:

    1

  11. Step 11:

    2

  12. Step 12:

    3

Comments

Please log in to add comments