Feed

how to model a mesh in solidworks

Tutorial by gurudath
Small

natives files are added including step

  1. Step 1:

    1.hello every one this is my first take on solidworks tutorial to be honest i'vent been much of a user sure i was using here and there...having siad that let's get down to some "men at work"ish thing.open up solidworks enter part design and create a sketch on the front plane

  2. Step 2:

    2.under surfaces tab extrude the profile

  3. Step 3:

    3.thicken the surface don't ask me how it's kids stuff

  4. Step 4:

    4.now hide that part select top plane create a square with that center option or what ever i'm sorry i have a bad memory

  5. Step 5:

    5.exrude it and make sure to uncheck merge result

  6. Step 6:

    6.use shell feature

  7. Step 7:

    7.select the highlighted surface and make a sketch

  8. Step 8:

    8.make a square

  9. Step 9:

    9.make all the edges of the square co linear with the inner edge

  10. Step 10:

    10.now make that as construction geometry

  11. Step 11:

    11.now draw a line using line command

  12. Step 12:

    12.use linear pattern as shown

  13. Step 13:

    13.do the same for the other end

  14. Step 14:

    14.repeat step 12 and 13 but the other way i mean make a line on the other diagonal and then repeat step 12 and 13 yeah i know i've should've shown that now don't make a federal case it was a honest mistake for god sake

  15. Step 15:

    15.use rib feature make the necessary selections in the tab

  16. Step 16:

    16.should look like this if not go figure

  17. Step 17:

    17.unhide the first part and select both features and use combine

  18. Step 18:

    18.i'm not saying anything
    cheers guys hope it was useful and i'm sorry if i was being presumptious