Feed

How to setting up blueprints in solidWorks ?

Tutorial by KHELLAF Ahmed
Small

First a little info about this tutorial assumes you know how to setting up blueprints of Camaro car in solidWorks after that you can start your modeling of camaro car in solidworks...
i hope that this tutorial will be helpful for all of you !!!

  1. Step 1:

    So Let’s Start the tutorial with New Part

  2. Step 2:

    start a sketch on the front plane by rigth click in the front plane nd click sketch's icon

  3. Step 3:

    click in TOOLS after that click in Sketch Toolsand after that click in Sketcg Picture

  4. Step 4:

    open the front view of your blueprint car (Exp camaro car)

  5. Step 5:

    send the propeities of the sketch picture to move this image so that it is centered on the originso rigth in the x position -(917 / 2 = - 458.5) and don’t forget to make the (-)like that the image is centred in the Origin

    Make the Transparency of the image in 0.30

  6. Step 6:

    start a sketch on the front plane by rigth click in the front plane nd click sketch's icon

  7. Step 7:

    click in TOOLS after that click in Sketch Toolsand after that click in Sketcg Picture

  8. Step 8:

    open the right view of your blueprint car (Exp camaro car)

  9. Step 9:

    send the propretise of the sketch picture to move this image so that it is centered on the origin and put the dimention of your car body
    Make the Transparency of the image in 0.30

  10. Step 10:

    start a sketch on the Top plane by rigth click in the Top plane nd click sketch's icon

  11. Step 11:

    click in TOOLS after that click in Sketch Toolsand after that click in Sketcg Picture

  12. Step 12:

    open the Top view of your blueprint car (Exp camaro car)

  13. Step 13:

    send the propeities of the sketch picture to move this image so that it is centered on the originso rigth in the x position -(917 / 2 = - 458.5) and don’t forget to make the (-)like that the image is centred in the Origin and put the dimention of your car body

    Make the Transparency of the image in 0.30

  14. Step 14:

    To add plane for the back view we need to creact a plan so click on Features nd after that click in Reference Geometry

  15. Step 15:

    Click in the front plane and add the distance for centring the plane from the caz's dimention

  16. Step 16:

    start a sketch on the Back plane by rigth click in the Top plane nd click sketch's icon

  17. Step 17:

    click in TOOLS after that click in Sketch Toolsand after that click in Sketcg Picture

  18. Step 18:

    open the Top view of your blueprint car (Exp camaro car)

  19. Step 19:

    send the propeities of the sketch picture to move this image so that it is centered on the originso rigth in the x position -(917 / 2 = - 458.5) and don’t forget to make the (-)like that the image is centred in the Origin and put the dimention of your car body

    Make the Transparency of the image in 0.30

  20. Step 20:

    This is the result of our Work !!!

    Dear Grabcarder's now we are learned how to setting up of the blueprints of care in solidWorks (Exp of Camaro car) so now u can start your modelling car
    all the best for all of you !!!

Comments

Please log in to add comments