Feed

Tutorial: How to import sketches in Autodesk Inventor?

Tutorial by Abhijeet
Small

Tutorial.

  1. Step 1:

    Create a new part.

  2. Step 2:

    Click on "image".

  3. Step 3:

    Browse and search for the image. Click open.

  4. Step 4:

    Click on "dimensions".

  5. Step 5:

    Dimension the sketch. Click finish.

  6. Step 6:

    Select yz plane from the browser and invoke a sketch on this plane.

  7. Step 7:

    Click on image.

  8. Step 8:

    Browse and open the required image.

  9. Step 9:

    Click on line command and make two axes as shown in the below figure.

  10. Step 10:

    Click rotate.

  11. Step 11:

    Select centre point as the line. Fill the angle to rotate. click ok.

  12. Step 12:

    Click "done"

  13. Step 13:

    select the fix constraint and constrain the lines.

  14. Step 14:

    Click on dimensions.

  15. Step 15:

    Edit dimension. Ok.

  16. Step 16:

    Use colinear constraint if required to position the image.

  17. Step 17:

    Finish the sketch.

  18. Step 18:

    Similarly import rest sketches.

Comments

Please log in to add comments