Feed

Tutorial - Modeling a Cup Point in SolidWorks?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Start SolidWorks in Part mode.

  2. Step 2:

    Top plane>>Sketch.

  3. Step 3:

    Draw a circle of 10mm.

  4. Step 4:

    Extrude it by 50mm.

  5. Step 5:

    Top face>>Sketch.

  6. Step 6:

    Draw a circle of 9mm.

  7. Step 7:

    Extruded cut with check the flip side to cut at 45º draft enabled.

  8. Step 8:

    Top face>>Sketch.

  9. Step 9:

    Draw a polygon with parallel dimension 5mm.

  10. Step 10:

    Extrude cut at 5mm.

  11. Step 11:

    Inside face>>Sketch.

  12. Step 12:

    While selecting the face click convert entities.

  13. Step 13:

    Extruded cut.

  14. Step 14:

    Draft at 60º.

  15. Step 15:

    Bottom face >> Sketch.

  16. Step 16:

    A circle of 8mm dia.

  17. Step 17:

    Extruded cut at 45 degree draft with flip side to cut.

  18. Step 18:

    Bottom face>>Sketch.

  19. Step 19:

    A circle of 5mm dia.

  20. Step 20:

    Extruded cut at 60º draft angle.

  21. Step 21:

    And we have the part body.

Comments

Please log in to add comments