Feed

Tutorial - Modeling cup headed bolt in SolidWorks?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Start Solidworks in part mode.

  2. Step 2:

    Top plane>>Sketch.

  3. Step 3:

    Draw a square of 7.5mm side by using center rectangle tool.

  4. Step 4:

    Extrude it by 7.5mm.

  5. Step 5:

    Top face>>Sketch.

  6. Step 6:

    Draw a circle of 3.75mm radii tangent to the sides of the box.

  7. Step 7:

    Extrude it by 50mm.

  8. Step 8:

    Front Plane>>Sketch.

  9. Step 9:

    Use Spline tool and make this profile.

  10. Step 10:

    Close it and use trim to erase the half entity.

  11. Step 11:

    Revolved Boss/base.

  12. Step 12:

    Revolve it.

  13. Step 13:

    Now we have the Part.

  14. Step 14:

    After making threads.

Comments

Please log in to add comments