Tutorials

  • Drafting ×
  • Process ×
  • Fusion 360 ×
  • Rendering ×
  • Other ×

I Built a Military Robot

Engineering Juice
in Process
46 6 Intermediate
Mobile, military robot optimized for use in desert environments which can be controlled remotely or autonomously and can collect/ stream video to a VR headset via its front mounted camera. The method of movement is a continuous track, created using steel roller chain connected by fasteners with 3D printed links. These loops sit on a custom designed drive sprocket and idler sprocket with 4 shock absorber loaded roller pins that act as the suspension system. The drive motors are powered by '18650' batteries, directed by a raspberry pi 4 and connected to a motor controller. For connectivity, a mobile device can connect to the pi's external antenna as it is a WiFi access point. From here, directions can be sent to the robot from the mobile device using the Node Red GUI and additionally, the entirety of the main raspberry pi computer can be accessed for the use of sending custom commands for autonomous movement.
Fusion 360 printed 3d rc programming pi raspberry electronics 360 fusion robot robotics

How to design Complete Robot using Voice Assistant like JARVIS in Fusion 360

Rugved Chavan
in Process
17 1 Intermediate
4-wheeled Robot Design Frame is 3D printable. Components - 1. Raspberry pi 4 2. Sony WebCam 3. Normal 3.5 mm jack Speaker 4. Custom Frame 5. MI 20000 mAh powerbank 6. 100 RPM Dual Shaft BO Motor - Straight with wheels Custom Voice Assistance code is running in background. Voice assistance code is connected with database which is having values like quantity and dimensions of components. Mail me for Jarvis source code. Like this video... 🤘
Fusion 360 automation electronics robots arduino engineering technology robot robotics

Metric taper

Carlos Soler
in Drafting
4 0 Beginner
It is a simple description of the ISO 3040 taper ratio and an application to the ISO 5356.
Other angle 5356 iso taper

How do you measure an item in a photo?

Ali Nasser
in Drafting
3 0 Beginner
How do you measure an item in a photo? using imagej English language tutorial https://youtu.be/VcQAnfpNwzw
Other measure in pictures measure in photo measure on picture imagej how do you measure an item in a photo

Exploded View & Drawing in Fusion 360

Jens Nielsen
in Drafting
2 0 Beginner
Just a quick video to show you how to make exploded views and drawings in Fusion 360. We'll use the Radial Engine model (GrabCAD link: https://grabcad.com/library/radial-engine-486) radial engine video: https://youtu.be/m3xAY4AH_Ho We'll cover: Making parts "fly apart" to show how they go together. A short animation of that process. And finally, a basic drawing with a list of parts and labels.
Fusion 360

Isometric view drawing with Dimensions in fusion 360

vikram ahuja
in Drafting
2 0 Beginner
Hi Guys, In this video, I am going to tell you that how can you make a Isometric view drawing with Dimensions in fusion 360. I have taught you how to make Isometric view drawing with Dimensions, which will make you understand in simple way. If you want to learn Fusion 360 software and If you want more tutorials, Then you can also subscribe my Youtube Channel, Whose link I have given you below. My Youtube Channel Name is: Ahuja Technical Hant https://www.youtube.com/channel/UClh7lX8d70gIwoA7z5Tt2Yg https://youtu.be/tEDOTYTzFgs
Fusion 360 draftingwithdimentions cadmodeling fusion360 drafting

Finding the focus of an ellipse graphically

Dzmitry Lysiankou
in Drafting
2 0 Beginner
Finding the focus of an ellipse graphically
Other finding the focus of an ellipse graphically

onvert 3D model into 2D Fully Dimesioned Drawing using Drawing Workspace of Autodesk Fusion 360.

Harsh Priyanshu
in Drafting
2 0 Beginner
Learn how to Convert 3D model into 2D Fully Dimesioned Drawing using using Drawing Workspace Autodesk Fusion 360 . this video is totally meant for beginners so i overlooked few tools and things which are not necessary for now:) I hope you enjoyed the designing process and the model. if you enjoyed the process and model, then hit subscribe and like the video. and don't forget to comment your views on this model and process.
Fusion 360 autodesk drawing 360 fusion

Jiggle

Alper ERDEM
in Drafting
1 0 Beginner
Plastic Injection Molding Flexible Core
Other

Gantungan Kunci Logo Teknik Mesin ITS

khoirul anam
in Drafting
1 0 Intermediate
Membuat gantungan kunci berlogo teknik mesin ITS dengan 3D print
Fusion 360

TV unit

Manali Dayma
in Drafting
1 0 Beginner
drafting tv unit
Other

Fusion 360 Tutorial | 2D Sketch Exercise - 01

Muhammed Altamash Khan
in Drafting
1 0 Beginner
Hey everyone Welcome back to DesignEnginereed. Today we learn how to create a basic 2D sketch. Commands used in the tutorial: Lines, Circles, Dimension, Construction lines, Trim, and Tangent
Fusion 360 2d sketch design engineered cad fusion 360

Solidworks drawings tutorial

Rosandro Babosa
in Drafting
1 0 Intermediate
In this video I will be showing you how to make a professional drawing in Solidworks 2017 So I am showing you exactly these things here: 1) Make drawing from part 2) Make auxiliary view 3) Section view 4) Detail view 5) Geometric Tolerance 6) Surface Finish 7) Tolerance/Precision 8) Edit sheet Format 9) Converting the SLDDRW file to PDF file 10) Fliping Cutting line direction 11) Use the view palette
Other upright fsae drawing 2d drafting tutorial solidworks

Orthographic projection. First & Third angle.

David Crosby
in Drafting
1 0 Beginner
A description of how to develop first and third angle projection drawings. See models in 3-D with my CAD Models.
Other orthographic projection 3rd angle projection 1st angle projection third angle projection first angle projection

Learning Autodesk Fusion 360 in Arabic - 15

Auday
in Drafting
1 0 Beginner
https://youtu.be/pe5l0tIGzec انتاج الرسم الهندسي - المخططات - من الاشكال المجسمة Produce the final engineering drawing from Objects
Fusion 360
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.