Tutorials

  • Modeling ×
  • Autodesk 123D ×
  • OBJ ×
  • SpaceClaim ×

Create an OBJ Cube With Your Favorite Images

Anirudh Krishnakumar
in Modeling
17 2 Beginner
Ever wanted to create a CAD file with your favorite pictures? There are many ways to apply images and textures to CAD files. However, for most of these operations, expensive programs or CAD experience might be required. This tutorial shows you how to make a simple OBJ cube, while explaining some of the basic OBJ nomenclature. It then explains the steps to map pictures on the cube's faces. The only tools you will need is a text editor like notepad and your favorite images!
OBJ photo cube cad map texture obj

Use Ansys SpaceClaim to Model Twisted Pair Wire

Fineman
in Modeling
3 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.
SpaceClaim wire pair twisted spaceclaim

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

How to make twisted bar

Oleksandr
in Modeling
1 0 Beginner
It is not obvious to create twisted bar in SpaceClaim, e.g. for welded grating. I hope this lifehack will help You to make it in different cad programs. Как скрутить пруток в SpaceClaim, например для решетчатого настила. Подозреваю, что этот способ можно применять и в других программах.
SpaceClaim bar twisted

S-shaped battery cooling geometry in ANSYS

Amit Kumar Yadav
in Modeling
1 0 Intermediate
Creating an S-shaped cooling geometry in ANSYS or any other simulation software requires a good understanding of fluid dynamics, heat transfer, and simulation tools. It may also involve several iterations to achieve the desired battery system cooling performance.
SpaceClaim automation simulation performance cooling system battery heat transfer fluid dynamics

How To Design A Helical Spring using ANSYS 2022

Mirazul Islam Badhon
in Modeling
0 0 Beginner
How To Design A Helical Spring using ANSYS
SpaceClaim solidworks ansys spring design helical compression spring helical spring spring

Vx²

lesly guirand-schoëlcher
in Modeling
0 0 Expert
Vx² is a corrected version. Let's imagine that the coverings are connected separately on each of our internal layers. Externally, secondary coils will be able to impact the frequency on the connected ionic output filaments. Let's imagine a small muscle capable of compressing a large pressure density of air, gas, liquid, etc. A high dynamic superior to its scale by the intensities.
Autodesk 123D ionic propulsion spectral jet
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.