Tutorials

  • Modeling ×
Missing_small

How to create a plastic container using Solidworks SUrfacing?

0 0 Intermediate
Most of the surfacing options are discussed in depth. Also, what care should be take while modeling so that you don''t face issue later.
Small

How to modify my parametric gear

1 0 Beginner
In this tutorial i'll show how to modify my parametric gear ( https://grabcad.com/library/parametric-gear-6 )
Small

How to create NPT (national pipe taper) threads using inventor

1 0 Intermediate
I have had people ask me on here how I model npt threads for some of the parts I make, so I figured I would put it out there for others to see as well. Note: if you look at the threaded models I have on this website you will see that I have clearly taken more time on some of them than others, this tutorial will teach you how to do it the right and proper way.
Small

14 Ways To Create Curve

0 0 Beginner
Surface modeling with Creo Parametric 4.0: 14 Ways To Create "Curve" * Sketched Curve * 2D Curve created between points * 3D Curve created by points * Curve defined by points from CSYS * Curve conected to another Curves * Curve created on a surface edge * Projected Curve * Wraped Curve * Curve defined by Equation * Intersected Curve by curves * Intersected Curve by quilts * Copy edge from solid * Curve from Cross Section * Trace Curve defined by mechanism
Small

PTC Creo 4.0: How to create Sketched features

0 0 Beginner
Step by step with Creo Sketch features - or: How to create Sketched features with Creo Parametric 4.0
Small

PTC Creo 4.0: How to create Hole feature

0 0 Beginner
Holes are pick and place features with circular cross-section. Holes remove material from the model. You can create couple of types of holes. In this tutorial you can learn how to Create Simple Straight Holes, Standard Holes and Sketched Holes. I will focus on hole placements (Linear, Radial, Diameter and Coaxial Placement) and Depth Options.
Small

PTC Creo 4.0: How to create Shell feature with Creo

0 0 Beginner
A shell feature is a pick and place feature that creates a hollowed out solid with a specified wall thickness. Note: The pick and place features (same as chamfers, rounds and holes) means that the shape of the feature is implied - you are not required to sketch the section. Pick and place features can be added once the model’s shape has been created. You can create two types of shells: • Open Shells (example in this video tutorial) • Closed shells (create base geometry and apply Shell feature)
Small

PTC Creo 4.0: How to create Chamfer feature

0 0 Beginner
... tutorial about How to create and edit Chamfer feature
Small

PTC Creo 4.0: How to create Round feature

0 0 Beginner
Couple of examples - How to create Round feature in Creo: * edge references * surface references * stop at reference * Round properties * Full Round * Variable Round and more ...
Small

PTC Creo 4.0: How to create Revolve feature

0 0 Beginner
The Revolve features are created in a similar way to Extruded features. The main differences are that the section of a revolve must contain a centerline (which represents the axis of revolution) and an angle of revolution is defined instead of a depth. Here is the video tutorial for you: How to create Revolve feature with Creo
Small

PTC Creo 4.0: How to create Extrude feature in Creo

0 0 Beginner
Most used feature in the Creo Parametric is Extrude feature. You will learn how to create, modify and configure solid and surface shapes easily and quickly.
Small

CATIA V5 UDF: TUBES MEASUREMENT

0 0 Intermediate
If you have ever worked with an imported geometry of a tube, you probably know, that CATIA doesn't provide any tool to measure a bend radius. If there is no centerline, measuring a bend radius or centerline radius requires an extra geometry. Our target is to create an UDF, which can be used for measuring bend radius, center line radius and bend angle of a dead geometry of a tube. ------------------------------------------------------------------------------- VISIT MY BLOG TO FIND MORE USEFUL TIPS: http://catia-tnt.blogspot.de/ -------------------------------------------------------------------------------
Small

How to make pulley in solidworks

1 2 Expert
https://youtu.be/QE4oBqgWBws
Missing_small

Tutorial 89: Solidworks tutorial: sheet metal

1 0 Beginner
Solidworks tutorial: sheet metal
Missing_small

Tutorial 88: how to make a sphere n solidworks

0 0 Beginner
how to make a sphere n solidworks
Missing_small

Tutorial 87:Solidworks tutorial: Solidworks equation

0 0 Beginner
Solidworks tutorial: Solidworks equation
Small

TUTORIAL 2: Inventor / KeyCreator

1 1 Beginner
See video: https://youtu.be/7eemvXbsCBg Do you really like parametric CADs??
Small

PC FAN & MOLD: SolidWorks / KeyCreator

2 0 Beginner
See video: https://youtu.be/QBIEqWPU-o4
Small

Intersection Curve Siemens Nx 10

0 1 Beginner
Intersection Curve Create a curve at the intersection of two unique sets of objects.
Small

Project Curve Siemens Nx 10

0 1 Beginner
Project Curve
Small

Nx 10 Sketch Creating Constraints Automatically Lesson 1.2

0 0 Beginner
This is a good method to use when applying geometric constraints to objects added to the sketch. The geometry is analyzed and geometric constraints are created based on the tolerances at the bottom of the dialog. Parts https://doc-0o-9o-docs.googleusercontent.com/docs/securesc/31edu1jlvkgun411q5g14oqbsj2v7us6/5lqs65c5j1arc89mtmhnvbb6r3a2udvh/1489248000000/05663580844508130033/05663580844508130033/0B1mOa-901OYmUWJneG0yRnBwMlU?e=download
Small

NX 10 Sketch Derived Lines(Creating an Offset Line Parallel at a Distance) Lesson 1.1

0 0 Beginner
Offset a sketch line, edge or curve a constant distance. Create a bisected line between two non-parallel lines. Create a parallel line halfway between two parallel lines.
Small

NX 10 Sketch Rectangle (Creating a Rectangle Using 'By 2 Points') Lesson 1.0

1 0 Beginner
There are three methods of creating a rectangle: By 2 Points By 3 Points By Center The first method is similar to the Rectangle command outside of the Sketch task environment, creating lines parallel to the X- and Y axes of the Sketch coordinate system. The other two methods allow you to create lines that are not parallel the sketch axes. Regardless of the method used, the lines created are perpendicular to each other.
Missing_small

3D MODELLING OF A BEARING BRACKET

0 0 Beginner
The bottom bracket connects and allows the crankset to rotate freely. It contains a spindle that the crankset attaches to, and the bearings that allow the spindle and cranks to rotate. ... An old American term for bottom bracket is hanger.
Small

SINK DESIGN

0 0 Beginner
See video: https://www.youtube.com/watch?v=jcV5qzf8gbM&ab_channel=ManuelValenzuela
Small

How to create helix along curve

1 0 Intermediate
When a Helix command is used in CATIA, a line has to be selected as an axis. To create a helix curve along any curve, not only a straight line, follow these steps.
Small

Kinetic Sculpture SolidWorks and Visualize Tutorial Part 2

0 0 Intermediate
3D Modeling: Learn key techniques and tools to design parts Features to be used: Boss-Extrude, Revolved Boss/Base, Sweep Boss/Base, Extrude Cut, Fillet, Circular Pattern, Helix/ Spiral Apply appearances Assemblies: Combine your part designs into 3D assemblies Mating parts, use Mechanical Mates like GearMate Motion Study - Learn how to create a basic Motion Study within Motion Analysis and then perform a simulation calculation Save Animation Rendering using Visualize: Import Assembly in Visualize Apply appearances Camera Environmental Final rendering using GPU
Small

How to create a spur gear with invloute profile using Creo 2.0

2 3 Beginner
In this I will show how to model a simple spur gear with involute profile. Involute profile generated by using Parametric equation. Follow images i have uploaded. You can download all images. All images have a number in sequence. If you found any difficulties mail me >>> sathishkumarc14@gmail.com i will send you a pdf file.
Small

How to create spur gear in Siemens NX?

1 0 Intermediate
This tutorial presents the modeling of an external spur gear in Siemens NX. The detailed modeling process is demonstrated on this video: https://youtu.be/pVPjDyOn6R4
Small

Basketball Ball Solidworks and Visualize Tutorial Part 2

1 0 Intermediate
Basketball Ball Solidworks - Visualize Tutorial Part 2 https://youtu.be/wTbhCHBm2TU https://grabcad.com/library/basketball-ball-solidworks-and-visualize-tutorial-1