Tutorials

  • FEM ×
  • Process Simulation ×

Fatigue Crack Growth Analysis of Modified Compact-Tension Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
84 15 Intermediate
This tutorial includes step-by-step fatigue crack analysis of Modified Compact-Tension Specimen.
spaceclaim computer aided engineering finite element analysis fracture mechanics paris law ansys workbench fatigue crack fatigue life

Spur Gear Set - Stress Evaluation

Semih Tinmaz
in FEM
58 0 Beginner
Spur gears have their teeth cut parallel to the axis of the shaft on which the gears are mounted, transmitting power between the parallel shafts. To maintain a constant angular velocity ratio, two meshing gears must satisfy a fundamental law of gearing: the shape of the teeth must be such that the common normal at the point of contact between two teeth must always pass through a fixed point on the line of centers. The contact point is called the pitch point. The goal is to assess the maximum stress during the transmission of the torque. By engineering judgement, the maximum stress occurs either at a contact point or at the root of a tooth due to the bending of the tooth. Since there is no restriction of deformation in the depth direction, i.e.,the gears are free to expand (or contract) in the depth direction, so it is modeled as a plane stress problem.
ansys workbench stress analysis transmission gears gear finite element analysis

Side Pole Test - High Speed Impact - Explicit Dynamics - ANSYS Workbench

Semih Tinmaz
in FEM
54 0 Intermediate
Explicit dynamics is a time integration method used to perform dynamic simulations when speed is important. Explicit dynamics account for quickly changing conditions or discontinuous events, such as free falls, high-speed impacts, and applied loads. Because these “nonlinear dynamics” are integrated into the simulation, explicit dynamics is the preferred choice for simulating highly transient physical phenomena. Some side impacts involve a vehicle travelling sideways into rigid roadside objects such as trees or poles. Often this is the result of a loss of control on the part of the driver, owing to speeding, misjudgement of a corner or because of a skid in slippery conditions.
high-speed impact impact finite element analysis explicit dynamics ansys workbench side pole test crash test

Topology Optimization of Triangular Bracket - ANSYS Workbench

Semih Tinmaz
in FEM
53 2 Intermediate
Topology optimization is a mathematical method which spatially optimizes the distribution of material within a defined domain, by fulfilling given constraints previously established and minimizing a predefined cost function. Main aim of this tutorial is optimizing and decreasing the material density of the triangular bracket as 50% by topology optimization.
ansys workbench ansys spaceclaim topology optimization topology

Planar Seal Simulation with Hyperelastic Experimental Data (Mooney-Rivlin Hyperelastic Model)

Semih Tinmaz
in FEM
47 0 Intermediate
The seal which is used in the door of applications from automotive industries. The seal is a long strip of rubber and it will be modeled as a plane strain problem. A series of material tests has been conducted, including the uni-axial tensile test, the bi-axial tensile test and the shear test. A series of trials of data fitting shows that, for these material testing data, the two-parameter "Mooney-Rivlin Hyperelastic Model" fits the data better than other models. It is decided to use Two-Parameter Mooney-Rivlin Model. The unit system used in this tutorial is "U.S. Customary (in-lbm-lbf-s)".
finite element analysis ansys workbench mooney-rivlin model planar seal test hyperelasticity

Static Crack Growth Analysis of ARCAN Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
45 0 Intermediate
This tutorial includes step-by-step static crack growth analysis of ARCAN Specimen.
ansys workbench fatigue life fatigue crack fracture mechanics finite element analysis computer aided engineering spaceclaim

Introduction to Finite Element Method /CAE

Prasertsak Naksakul
in FEM
18 0 Beginner
Finite Element Method for product design and process improvement.
fluid improvement process cae analysis stress design fem

Keyshot Animation Tutorial Using Simple Model Of High Bypass Turbojet Engine

Anuj Kaushal
in Process Simulation
15 2 Beginner
In this tutorial i have used keyshot software for animation purpose. I have used a 3D model of a High Bypass Turbojet Engine for denomsration. It took couple of hours to create the animation video that's why i have skipped that part from the video.
blades compressor jet turbine turbojet engine bypass high tutorial animation keyshot

Linear Static Study in 10 simple steps.

Ilirjan Leci
in FEM
14 0 Intermediate
Linear Static Study with SolidEdge.
fea solidedge

Spring stiffness calculation in SOLIDWORKS

Ahmed Sakib
in FEM
14 1 Intermediate
How to calculate spring stiffness with Solidworks simulation @cadingal . Static structural analysis of a helicoil spring will be done using self contact approach to calculate spring stiffness in Solidworks.
finite element analysis fem solidworks spring stiffness calculation spring stiffness simulation

Simulation of Two Flanges with Bolts

zaher
in FEM
13 10 Intermediate
Solidworks Simulation, Bolt connection
solidworks flanges bolt_connection simulatiom

How to do Structural Analysis of a Car Wheel in SOLIDWORKS?

Ahmed Sakib
in FEM
11 0 Intermediate
How to do Structural Analysis of a Car Wheel in SOLIDWORKS? @cadingal Learn..... How to assign gravity load? How to assign Force load? How to evaluate stress, deformation & factor of safety?
car wheel analysis fea car wheel solidworks simulations car wheel simulation car wheel fea

External Windmill flow simulation in solidworks fully explained for beginners from scratch

Amit Mourya
in FEM
10 0 Intermediate
In this video you are going to learn how to do external flow simulation in solidworks. i have defined and make everything from scratch like making geometry explaining why i am doing a particular step etc. i have also explained how to define boundry conditions in solidworks . what is mean by reference of axis . how to do wind flow simulation in solidworks with deep explaination i hope this video helps you a lot . I also define how to use equation goal . if you want to learn about more flow simulation in solidworks checkout this playlist https://www.youtube.com/playlist?list=PLjExndY7KnkBnQ6LS2u9ZfjOMOVGFIfxI and if possible support us on paypal so that we can create more and better content : paypal.me/nobodyknow137
turbine wind conditions boundary aerodynamic graph plot how tutorial solidworks simulation flow external

ANSYS TUTORIAL 2022 : Stress and Fatigue Analysis of a Connecting Rod Using ANSYS Workbench 2022

Mirazul Islam Badhon
in FEM
10 0 Beginner
ANSYS TUTORIAL 2022 : Stress and Fatigue Analysis of a Connecting Rod Using ANSYS Workbench 2022
finite element analysis fatigue analysis connecting rod ansys

SolidWorks Flow Simulation Tutorial with Rotating Region on Cross Flow Turbine

Usman Akhtar
in Process Simulation
10 0 Beginner
In this Video tutorial i will tell you how to do flow simulation in solidworks on turbine with rotating region. we will analyze flow trajectories also.
solidworks simulation flow
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.