Tutorials

  • injection ×

How to Create a Mold Using SolidWorks

Sérgio CAD CAM
in Tooling
17 0 Beginner
How to Create a very, very simple Mold Using SolidWorks, step by step.
3d cad solidworks injecao injection molde mould mold

TUTORIAL MOLD 01

Sérgio CAD CAM
in Tooling
16 0 Beginner
TUTORIAL HOW TO CREATE A MOLD IN SOLIDWORKS, STEP 1: SCALE AND DRAFT ANALYSIS; TUTORIAL DE COMO CRIAR UM MOLDE NO SOLIDWORKS, PRIMEIRO PASSO, DEFINIR A CONTRAÇÃO (ESCALA) E ANÁLISE DE INCLINAÇÃO DO PRODUTO. CREDITS TO https://grabcad.com/library/plastic-tray-9 BY https://grabcad.com/ashok.kumar-64
solidworks molde mould injection mold tutorial

How to save multibodies as SolidWorks Parts

Sérgio CAD CAM
in Modeling
16 0 Beginner
How to save multibodies created during a mold construction to make the post assembly.
SOLIDWORKS solidworks injecao injection isopor eps molde mould mold

How to Create a Mold Using Interlock Surface

Sérgio CAD CAM
in Modeling
15 0 Beginner
How to draw a mold using Interlock Surfaces, very common in complex surfaces, when it's not possible to create a sketch in the Parting Surface; Como criar um molde no SolidWorks utilizando a superfície de Interloque, muito comum em moldes de peças complexas, quando não é possível criar um esboço na própria superfície de fechamento.
SOLIDWORKS isopor eps injecao injection molde mould mold

RIB CONSTURCTION IN PLASTIC PARTS

suresh kumar
in Modeling
4 3 Beginner
https://www.youtube.com/watch?v=Pv7QTBuobag Rib design in plastic Part by using Unigraphics
NX Unigraphics modling injection plastics design product plastic

How to create an insert for injection mold by using Solidworks l Step-by-Step l Mold Tools l UiTM

PT
in Modeling
3 0 Beginner
Inserts are located at both cavity plate (Plate A) and core plate (Plate B). It is important to create the shape of the desired. Besides the function is to create a shape, the inserts also acts as an additional parting line that enable to remove trapped air. https://www.youtube.com/watch?v=PCttabhlf4g&t=69s For any inquiries about the design, don't hesitate for email to ptchannel1234@gmail.com
SOLIDWORKS tools molding injection solidworks insert mold

UG nx mould design nx 10

VINAY
in Tooling
2 3 Beginner
Injection mould design with UG nx 10
cavity core nx mould-ug injection design mould

01- SolidWorks Plastics part 1

Masoud Soleimani
in Process Simulation
1 0 Beginner
Introduction to Solidorks Plastics . Analyzing how a mold model will fill with high pressure melted polymer. getting info on how much force the mold will require and how the polymer may behave inside the mold .
analyze shell solidworks injection mold plastics

[VIDEO] Plastic Injection Filling 3DExperience

Maxime Chagnot
in FEM
1 0 Beginner
Here is an example that illustrates the power of the 3DExperience 16X! The 3D model (plastic part) is designed in CATIA Part Design and the plastic injection is simulated in SIMULIA Platic Part Filling. Everything is done on only one platform: the 3DExperience
flow fem simulia 3dexperience catia injection filling plastic

[VIDEO] Fill analysis using Visiflow

Sheetal s
in FEM
1 0 Beginner
This video shows how to perform "Fill Analysis" IN Visiflow software...The enhanced filling module in #visi enables holding pressure and cooling time to be optimized. It also enables balancing of the sprue situation. Some more great features include : *Fibre orientation *Packing and cooling times *Pressure distribution during the holding phase *Tool closing force. For more information visit kirotech.in
visiflow analysis flow plastics moulding injection

Guiding System Of an Injection Mold

Murali K
in Tooling
0 0 Beginner
Guiding System: Guiding system of injection mold works as guides to ensure precise mechanic movements. Generally the standard mold base all have guiding design, like guide pins between cavity side and core side, mold designers can just choose the proper mold base. Typical mold guiding system include, guiding between A/B plates, guiding for stripper plates, guiding for runner plates, guiding for ejector pins. All this guiding system can be customized when you order the mold base. But when the parts have particular structure and require high precision, this customized guiding system might not be enough, the guiding pins could not perform as well as before after a long time running, so injection mold designers should consider special guiding design besides these customized guiding design on the mold base. Precision guiding components have been standardized, such as tapered dowel pins, side lock, etc. some precision guided positioning device must be designed according to the specific structure of the injection mold.
mold injection system guiding

How to properly create a bottle for injection moulding

Bobi
in Modeling
0 0 Beginner
Do not use "Sweep 2 rails" in Rhino, because it will deform the bottle and add an unnecessary amount of control points. Use "Rail revolve" instead.
Rhino sweep package proper revolve rail moulding injection bottle
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.