Feed

Tutorial: How to model Tire in PTC Creo Parametric and show design intent

Tutorial by Vladimir Palffy
Small

Toroidal Bend feature with PTC Creo Parametric 2.0

  1. Step 1:

    Create Extrude feature - base shape

  2. Step 2:

    Add Tire shape (add or remove material)

  3. Step 3:

    Create Pattern feature from added shape (create tread design)

  4. Step 4:

    Add some Rounds/Drafts (customize tread design)

  5. Step 5:

    Select Toroidal Bend feature

  6. Step 6:

    Select References Tab >> Solid Geometry / Define... >> Select Sketch plane and confirm Sketch

  7. Step 7:

    Create Profile Section with Coordinate system >> Confirm Ok

  8. Step 8:

    Select 360 degrees Bend from drop down menus. Choose Front and Back surfaces - system automatically will connect selected surfaces / references

  9. Step 9:

    ... system automatically will connect selected surfaces / references

  10. Step 10:

    Finish Toroidal Bend feature (final geometry)

  11. Step 11:

    Finish your design for Tire (add some Revolve feature, Round, etc.)

  12. Step 12:

    Create 3D text - see Tutorial here: http://communities.ptc.com/blogs/vpalffy/2011/04/23/3d-text--offeset-from-the-surface

  13. Step 13:

    Create final rendering :)

Comments

Please log in to add comments