Feed

Tutorial - Modeling flat counter sunk Bolt in SolidWorks?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Top plane>>sketch.

  2. Step 2:

    Draw a circle of 15mm dia.

  3. Step 3:

    Extrude it by .625mm.

  4. Step 4:

    Bottom face>>sketch.

  5. Step 5:

    While Selecting the face click convert entities.

  6. Step 6:

    Extrude it by 5mm at 45º draft.

  7. Step 7:

    While selecting top plane click reference geometry >> plane.

  8. Step 8:

    Offset the top plane by 2mm.

  9. Step 9:

    Plane1>>sketch.

  10. Step 10:

    Draw a circle of 10mm dia.

  11. Step 11:

    Extrude it by 30mm.

  12. Step 12:

    Top face>>sketch.

  13. Step 13:

    Center rectangle of 1.5mm width.

  14. Step 14:

    Extrude cut by 0.8mm.

  15. Step 15:

    Chamfer.

  16. Step 16:

    Select the lower edge. Distance=1mm and angle=45º.

  17. Step 17:

    After making threads.

Comments

Please log in to add comments