Feed

Tutorial - Modeling Rounded counter sunk bolt in SolidWorks?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Top plane>>sketch.

  2. Step 2:

    Draw a circle of 15mm dia.

  3. Step 3:

    Extrude it by .625mm.

  4. Step 4:

    Dome feature.

  5. Step 5:

    Select Top face and input the length be 1.5mm.

  6. Step 6:

    Bottom face>>sketch.

  7. Step 7:

    While selecting the bottom face click convert entities.

  8. Step 8:

    Extrude it by 3mm and 45º draft.

  9. Step 9:

    Bottom face>>Sketch.

  10. Step 10:

    Click Convert entities.

  11. Step 11:

    Extrude it by 30mm.

  12. Step 12:

    Chamfer.

  13. Step 13:

    Lower edge at 1mm and 45º.

  14. Step 14:

    Front plane>>Sketch.

  15. Step 15:

    Draw this rectangle.

  16. Step 16:

    Extrude cut through all in both direction.

  17. Step 17:

    Now we have the part body.

  18. Step 18:

    After cutting threads.

Comments

Please log in to add comments