Tutorials

  • Modeling ×
  • Powershape ×
  • Rhino ×
  • T-Flex CAD ×

Tutorial Camera Mold in PowerShape

Sérgio CAD CAM
in Modeling
19 2 Intermediate
Tutorial Camera Injection Mold in PowerShape from Autodesk; Available to download in https://grabcad.com/library/camera-mold-sergio-cad-cam-1 #tutorial #injection #mold #mould #powershape #surface
Powershape injection molde mould mold powershape tutorial

TUTORIAL SOAP BOX MOLD POWERSHAPE

Sérgio CAD CAM
in Modeling
17 0 Intermediate
TUTORIAL SOAP BOX INJECTION MOLD IN POWERSHAPE; Available to Download in Grabcad: https://grabcad.com/library/soap-box-mold-sergio-cad-cam-1 credits to: https://grabcad.com/library/soapbox-7 by https://grabcad.com/v.rajesh-1 #TUTORIAL #MOLD #MOULD #POWERSHAPE #STEPS
Powershape molde mould powershape tutorial injection mold

Tutorial: how to model revolving surfaces without degenerated point

Ferro
in Modeling
12 2 Intermediate
This tutorial shows how to reconstruct a portion of a revolving surface, in order to remove the degenerated point
Rhino patch boundary fair degenerated

Filling basic 6-sided holes in Rhino

Bobi
in Modeling
8 1 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.
Rhino rhino blend hole 6-sided surface surfacing nurbs transition

Video Tutorials from Rhino 3D Tutorials

Alexandre Galin
in Modeling
8 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/
Rhino surfacing 3d rhinoceros taught self tutorials prototyping rhino3d

Make a Ring With Text in Rhino

JOSE
in Modeling
7 1 Expert
Make a ring with a text
Rhino rhino design jewelry

Introduction to Pave setting, and its basic knowledge.

Beauty Roy Mondal
in Modeling
4 0 Expert
What a Pave Setting Is The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle.
Rhino cam cad modeling fashion jewelry rhino settings diamond setting pave

starlord Tutorial - image Pixel [ sampler ] with Rhino + Grasshopper

Matias Adrian Casciotta Gracia
in Modeling
4 0 Intermediate
éste es un Tutorial para convertir una imagen en geometrías tipo Pixel this is a Tutorial to convert an image into Pixel geometries Regards! subscribe! MATGICAL@blogspot.com f DigitalMagical magicaldigital Ig
Rhino programing image geometries modeling tutorial grasshopper rhinoceros pixel

Filling 6-sided holes in Rhino

Bobi
in Modeling
3 0 Intermediate
This tutorial shows how to fill a 6-sided hole surrounded by complex surface transitions in Rhino.
Rhino transition nurbs surfacing surface 6-sided hole blend rhino

Make quickly a signet ring setting with a cabouchon

JOSE
in Modeling
4 1 Expert
Make a signet ring setting with a cabouchon. Quickly
Rhino jewelry

IMPROVEMENT OF THE TRAINING COURSE OF 3D MODELING AND PROTOTYPTING

Sergey Strygin
in Modeling
2 2 Expert
The monograph discusses the features of the use of additive technologies in the scientific-educational process of the University. Areas of application of 3D modeling and prototyping related to training students. The training course is based on examples of virtual modeling and design toys aimed at the development of scientific and technical creativity of children, educational models, and also finished products and their components, including logos, emblems.
T-Flex CAD logos models educational toys creative technology additive

Industrial shelter 12x4 meters (Rhinoceros)

Bobi
in Modeling
2 0 Beginner
Industrial shelter 12 meter wide, 4 meters long and 2,97 meters total high (2,53 meters usable high from the front, and 2,88 meters from the back). Area is 48 m2. Uses 5 mm thick laser cut plates and the following tubes sizes (all in millimeters): 100x100x2 mm 80x40x2 mm Includes a link to YouTube with a video tutorial showing the design process from start to finish with Rhinoceros: https://youtu.be/6KgcZnYgpok
Rhino home storage garage building rhinoceros rhino shelter industrial

T-FLEX CAD 17 Basics

T-FLEX CAD ST
in Modeling
2 0 Beginner
The tutorial includes 5 videos that will show you how to work with the interface of the T-FLEX 17 CAD system. Download the free training version of T-FLEX CAD 17: https://www.tflex.com/resources/tflexcadst/
T-Flex CAD interface basics cad t-flex tflex

Zig-zag stairs

Bobi
in Modeling
2 0 Beginner
Simple modeling tutorial for creating modern zig-zag stairs with Rhino.
Rhino steps simple smart cool modern architecture rhino stairs

Bottle - PowerShape Reverse Engineering workflow

Didi Widya Utama
in Modeling
2 0 Intermediate
This video shows workflow of Reverse Engineering Process, start from scanning the physical model and surface creation in Powershape. the scanner i used was Roland Picza 3D scanner if someone interested to learn and try , i could send you the stl scanned data file , just write your request in the comments below hope it, enjoy a happy learning. thanks
Powershape powershape engineering reverse study learning modeling 3d tutorial
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.