Tutorials

From GRABCAD to INVENTOR

792f9a39
in Design & CAD
2 3 Intermediate
Download files from GRABCAD and edit it in INVENTOR Link: https://youtu.be/UasZ2dt37AU
Autodesk Inventor step igs

Create blue print by Autodesk Inventor

Ebrahim Zokaee
in Drafting
2 1 Intermediate
In this tutorial, study how to create a blue print by Autodesk inventor.
Autodesk Inventor inventor drafting blue print

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Create Solidworks Walkthrough Animation [Explained]

Ahmed Sakib
in Modeling
2 0 Intermediate
In this video ANSOL is going to show you hw to create Solidworks walkthough animation. In order to create Walk-through follwing parameters should addresses. -Ground plane or surface for avatar -Contrained path followed by avatar -Height of avatar
SOLIDWORKS cad walkthrough soldiworks animation walk through animation solidworks walkthrough how to create

MOLD DESIGN || How to Split Core-Cavity, Insert Core-Cavity, Stripper & Slide for Plastic Teapot

langgeng wahyu hidayat
in Drafting
2 1 Intermediate
This is the mold for the teapot product from the previous video ( https://youtu.be/7Z15kXXiyng ) using a slide system for the mold opening. In this video, we will show how to split the core-cavity, insert the core-cavity and slide. I hope this video is useful!
SOLIDWORKS mold core cavity mold slide

SolidWorks | 3D CAD EXERCISES 101 | StudyCadCam | Solution Tutorial |

Mahmud Hasan Maraj
in Modeling
2 0 Intermediate
Let's see this 3D CAD EXERCISE. In this section we will make this part using various tools in SolidWorks. Chapters: 00:00 - Intro & view of the 3d model 00:15 - 3D Cad Exercise 101 08:04 - End Screen, Suggested Videos & Playlist You can also see other videos, 3D CAD EXERCISES - STUDYCADCAM: https://www.youtube.com/playlist?list=PL1MUQa6T9kPc-kMMipt1CX5X1jnAYYwy6 SolidWorks Playlist: https://youtube.com/playlist?list=PL1MUQa6T9kPfgkhr-0B1MzA1p-tsxWW34 #MHM #SolidWorks
SOLIDWORKS solidworks practice exercises solidworks tutorial studycadcam 3d cad exercises 101 solidworks

Complex Table

Md Imran Hossen
in Modeling
2 0 Intermediate
#cad #solidworks
SOLIDWORKS complex table table

SolidWorks | 3D CAD EXERCISES 3 | StudyCadCam | Solution Tutorial |

Mahmud Hasan Maraj
in Modeling
2 2 Intermediate
Let's see this 3D CAD EXERCISE. In this section we will make this part using various tools in SolidWorks. Chapters: 00:00 - Intro & view of the 3d model 00:15 - 3D Cad Exercise 3 09:06 - End Screen, Suggested Videos & Playlist You can also see other videos, SolidWorks Playlist: https://youtube.com/playlist?list=PL1MUQa6T9kPfgkhr-0B1MzA1p-tsxWW34 #MHM #SolidWorks
SOLIDWORKS practice tutorial studycadcam exercises cad 3d solidworks

Bubble Basin

langgeng wahyu hidayat
in Modeling
2 0 Intermediate
How to draw a bubble basin using revolve surface commands. Then add a bubble profile with the fill surface command. On the fill surface need to make ellipse split line, patch boundary and constraint curves first. While on the lips of the basin using lofted surface commands. Happy watching!
SOLIDWORKS oval ellipse baskom plastic surface bubble basin

Auger in solidworks

Hamza Siddique
in Design & CAD
2 0 Intermediate
Auger in solidworks
SOLIDWORKS 3d modelling mechanical projects cad cam engineering solidworks

Solidworks Tutorial I Embossing & Engraving on Flat Surface I Part I Assembly I Exercise I CADDesign

Arbazkhan Juneja
in Modeling
2 0 Intermediate
Embossing & Engraving on Flat Surface in Solidworks. We will learn the below features in Solidworks. 1. 2D Sketching 2. Extrude 3. Extruded Cut 4. Hole 5. Text 6. Embossing 7. Engraving Practice 2D Drawing Links: Facebook: https://www.facebook.com/CAD-CAM-Lear... Instgram: https://www.instagram.com/cad_cam_lea Linkedin: https://www.linkedin.com/company/cad- Other Important Videos for Beginners: Solidworks Exercise for Beginners 1: https://www.youtube.com/watch?v=tdlvO... Solidworks Exercise for Beginners 2: https://www.youtube.com/watch?v=ghMVD... Solidworks Exercise for Beginners 3: https://www.youtube.com/watch?v=y4A8T... Design Impeller in Solidworks: https://www.youtube.com/watch?v=Jwgkq... Design Hair Brush: https://www.youtube.com/watch?v=vkpv8... Design Pneumatic Cylinder in Solidworks: https://www.youtube.com/watch?v=l5-0X... Leaf Spring: https://www.youtube.com/watch?v=QkPC0... Pulley: https://www.youtube.com/watch?v=yLIUw... Tank: https://www.youtube.com/watch?v=tNZD1...
SOLIDWORKS

Fusion 360 : Plummer block part 1

N. Kumar
in Modeling
2 0 Intermediate
Dear Viewers, This Video will provide you some idea how to create plummer block body with the help of various commands available in fusion 360. Join for more discussion and videos https://t.me/+IfjCfFqrIOQ3M2Z Follow the Fusion 360 channel on WhatsApp: https://whatsapp.com/channel/0029VaA1zCkGOj9rSaB1Z72l # fusion360 #Elearning #animation #3dmodeling #onlineeducation #autodesk #autocad #catia #solidworks #inventor #3dprinting #mbm #mbmu #engineering #engine #crank https://t.me/+IfjCfFqrIOQ3M2Zl
Fusion 360 modeling design plummer block autodesk creative fusion 360

Solid works Tutorial - 1

SHAPE IT
in Modeling
2 1 Intermediate
In this tutorial you will learn solidworks features Kindly like the video and subscribe the channel for more interesting design. Need 3D model and 2D manufacturing drawing of the same part? mail us : For freelancing work or inquires please drop a mail to shapeit.socialmedia@gmail.com
SOLIDWORKS shapeit flower pot design pot design plastic design solidworks surface modellig solidworks tutorail solidworks 3d print

COMO utilizar ENVOLVENTE en SOLIDWORKS - ENVOLVENTE

Diego Conde
in Process
2 0 Intermediate
COMO utilizar ENVOLVENTE en SOLIDWORKS - ENVOLVENTE
drawing envolvente solidworks

How to use - Control Points - Shape Sculptor - CATIA V5

3D Comparison
in Modeling
2 0 Intermediate
Control points define the shape and form of your mesh in Shape Sculptor. By manipulating these points, you can sculpt, deform, and refine your model. Each point influences the surrounding area of the mesh.
CATIA refine reshape change deform surface control points
White Stratasys Logo White GrabCAD Logo
© 2026 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.