Tutorials

  • geometry ×

Suspension & Steering Geometry (Front) | 4 Wheeler | Double Wishbone | Anti-Ackerman

A Square C & D
in Modeling
6 9 Intermediate
In this video tutorial, i have shown how to make Front Suspension and Steering geometry of a 4 wheeler. Here, I have taken an All terrain Vehicle(ATV) suspension and steering system for reference, but same approach can be applied while designing for Standard cars and other vehicles. Only the parameters will change according to the type and dynamics of the vehicle. Suspension type- Double Wishbone Steering geometry type- Anti-ackerman Model link:- https://grabcad.com/library/suspension-and-steering-geometry-4-wheeler-1 Basic Parameters used :- 1. Wheelbase= 55 inches 2. Trackwidth= 52 inch (Front and Rear same) 3.Front Ground clearance= 15 inches 4. Rear Ground clearance= 14 inches 5. KPI angle= 7° 6. Castor angle= 12° 7. Knuckle length= 6 inches 8. Spindle length= 120 mm 9. Spindle length (for wheel nut)= 75 mm 10. Steering Arm length= 80 mm 11. Steering Arm angle with spindle= 110° 12. Tyre Outer Diameter= 23 inches Please note that these parameters are used just for educating and learning purpose. Concrete calculations and certain other important factors related to Vehicle dynamics and Handling along with suspension analysis are considered and performed before designing any suspension and steering system of any vehicle. But these values are close to the standard industry values. I also used them in various college level projects. So they can be used as reference values. If you found the video informative, please Hit the Like button, Comment any doubts/issues related to the content in the video and Please share among your friends and colleagues. Stay tuned with us for more contents related to Designing and Racing game-plays.
SOLIDWORKS wishbone double wheeler geometry steering suspension sketching solidworks

Exhaust Manifold Tutorial in SolidWorks

jehan kothari
in Modeling
2 1 Intermediate
All you need to know is just functionality of the feature! I have created 3d Model of Exhaust Manifold from its drawing step by step so that even an absolute beginner can follow this tutorial. There are so many different commands used to create it. If you want to take a step up then this is the right tutorial to follow. All you need to have is just SolidWorks and patience :)
SOLIDWORKS modeling 3d advanced solidworks pattern geometry sweep curve project

Hypertext

Paul Felski
in Theory
1 1 Intermediate
Text to Image to Shape defined as equations of geometry. Logographic and Orthographic system to build a surface matrix. Matrices are derived as integrated hypertexts and links.
mosaic geometry image

PANGEA

Paul Felski
in Theory
0 0 Intermediate
Short tutorial on advanced Euler constant variable equations. Awesome graphics display a node to geometry analysis. Equations are meant to be inspected and expanded with reference to gravity and change in Force.
geometry nodes mathematics equations

The little triangle that could: Parametric Regular Polygons

Konstantinos Froudarakis
in Modeling
0 0 Intermediate
Let us tell you about the "Generator Triangle" method. This educational video unveils a straightforward technique to construct regular polygons using a single variable. Witness triangles seamlessly transform into polygons with adjustable sides. Explore parametric design principles as we dissect the process. With interactive visuals, grasp the method's accessibility for all learners. Ideal for students, artists, and those curious about the synergy of creativity and logic. Join us to demystify theoretical geometry, revealing practical polygon creation through "The Little Triangle That Could." Like, subscribe, and enable notifications for more math-infused insights. https://youtu.be/5pA72p3B7QU
Alibre Design equation editor alibre variable geometry math triangle parametric polygons

Copy and Publish Geometry

Vladimir Palffy
in Modeling
0 0 Intermediate
In this video tutorial you can learn how to reuse geometry from one model to another. The best practice is if you create Publish geometry on a reference model and then you will Copy this geometry to source model. Note: Copy geometry from 1st model to 2nd model Publish Geometry can include: surfaces, curves, datum features, etc.
PTC Creo Parametric geometry publish copy

Solidworks advanced tutorials 121| working with reference geometry

sakib ahmed
in Modeling
0 0 Intermediate
Working with reference geometry in solidworks How to make reference plane at angle? How to make offset plane? How to make a reference axis at intersection of two plane? #solidworks​ #Reference​ geometry Solidworks tutorial how to make reference geometry?
SOLIDWORKS plane geometry reference solidworks

H-Arm suspension geometry | Soildworks

A Square C & D
in Modeling
0 0 Intermediate
Hello everyone In this video tutorial, I have shown how to make the H-Arm Suspension at the rear Suspension of a 4 wheeler. Here, I have taken an All-terrain Vehicle(ATV) rear suspension for reference, but the same approach can be applied while designing for Standard cars and other vehicles. Suspension type- H-Arm type Suspension with One Control Link Link to model- https://grabcad.com/library/h-arm-suspension-geometry-solidworks-1 If you found the video informative, please hit the Like button, Comment on any doubts/issues related to the content in the video, and please share among your friends and colleagues.
SOLIDWORKS baja sae tutorial video dynamics vehicle geometry suspension

Publish geometry and Skeleton

Vladimir Palffy
in Modeling
0 0 Intermediate
In this tutorial, you can learn How to create Skeleton model, How to define Publish geometry and reuse it as Copy Geometry
PTC Creo Parametric geometry publish skeleton

Extracting Part History From Imported Parts in CATIA V5

Innovative Mechanical Designs
in Modeling
0 0 Intermediate
In this tutorial i have explained how to extract part history from imported parts in CATIA using feature recognition tool.
CATIA tutorial design part recognition feature geometry imported v5 catia

All in one: Repair Geometry

Vladimir Palffy
in Design & CAD
0 0 Intermediate
In this video tutorials you can learn How to repair geometry with Import Data Doctor in Creo and /or How to convert surface model to solid
PTC Creo Parametric model surface geometry imported import how gemetry repair
White Stratasys Logo White GrabCAD Logo
© 2026 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.