Tutorials

  • FEM ×
  • Process Simulation ×

Spur Gear Set - Stress Evaluation

Semih Tinmaz
in FEM
58 0 Beginner
Spur gears have their teeth cut parallel to the axis of the shaft on which the gears are mounted, transmitting power between the parallel shafts. To maintain a constant angular velocity ratio, two meshing gears must satisfy a fundamental law of gearing: the shape of the teeth must be such that the common normal at the point of contact between two teeth must always pass through a fixed point on the line of centers. The contact point is called the pitch point. The goal is to assess the maximum stress during the transmission of the torque. By engineering judgement, the maximum stress occurs either at a contact point or at the root of a tooth due to the bending of the tooth. Since there is no restriction of deformation in the depth direction, i.e.,the gears are free to expand (or contract) in the depth direction, so it is modeled as a plane stress problem.
ansys workbench stress analysis transmission gears gear finite element analysis

Introduction to Finite Element Method /CAE

Prasertsak Naksakul
in FEM
18 0 Beginner
Finite Element Method for product design and process improvement.
fluid improvement process cae analysis stress design fem

Keyshot Animation Tutorial Using Simple Model Of High Bypass Turbojet Engine

Anuj Kaushal
in Process Simulation
15 2 Beginner
In this tutorial i have used keyshot software for animation purpose. I have used a 3D model of a High Bypass Turbojet Engine for denomsration. It took couple of hours to create the animation video that's why i have skipped that part from the video.
blades compressor jet turbine turbojet engine bypass high tutorial animation keyshot

ANSYS TUTORIAL 2022 : Stress and Fatigue Analysis of a Connecting Rod Using ANSYS Workbench 2022

Mirazul Islam Badhon
in FEM
10 0 Beginner
ANSYS TUTORIAL 2022 : Stress and Fatigue Analysis of a Connecting Rod Using ANSYS Workbench 2022
finite element analysis fatigue analysis connecting rod ansys

SolidWorks Flow Simulation Tutorial with Rotating Region on Cross Flow Turbine

Usman Akhtar
in Process Simulation
10 0 Beginner
In this Video tutorial i will tell you how to do flow simulation in solidworks on turbine with rotating region. we will analyze flow trajectories also.
solidworks simulation flow

Free | Solidworks simulation Course for Beginners

Amit Mourya
in FEM
10 0 Beginner
Things you will learn in this Solidworks Simulation Course For Beginners Meaning of mesh why they are important , static simulation ,advanced fixture in solidworks,thermal simulation in solidowkrs,graph plotting in solidworks simulation,design table in solidworks simulation,non linear simulation in solidworks,gear simulation in solidworks,thermal fin simulation and how to optimize fin so that you can get best result optimisation will done using design table in solidworks simulation,animation in solidworks simulation,report generation in solidworks simulation and much more FREE COURSE LINK SOLIDWORKS BEGINNER TO ADVANCE: https://youtu.be/iYYHmvnlSQo Solidworks animation and Motion analysis udemy course link : https://www.udemy.com/course/solidworks-animation-and-motion-analysis/?referralCode=8F40E7F83856CFF0C5FE [if you need discount coupon to message me on my facebook page ] PLEASE DONATE SO THAT THIS CHANNEL CAN CREATE MORE AND BETTER FREE CONTENT: paypal.me/nobodyknow137 Our facebook Page : https://w
plotting graph thermal static test drop fixtures advanced course simulation tutorial solidworks knowledge cad

Linking ABAQUS and FORTRAN

Rahul
in FEM
9 6 Beginner
ABAQUS and FORTRAN are linked to execute User Subroutines such as VUMAT, UMAT, USDFLD, etc. You can find various versions of ABAQUS and FORTRAN Available. Here is the compatibility list: ABAQUS 2017 - Intel Composer XE 2013 or above, - Visual Studio 2010 or above v6.14 - Intel Visual Fortran 12.0 or above - Visual Studio 2010 or above One can download Student version of FORTRAN for free from here: https://software.intel.com/en-us/qualify-for-free-software/student
vumat fortran abaqus

SIMPLE TIPS FOR MAKING MOTION STUDY

kiran
in Process Simulation
7 0 Beginner
here you can find simple tips to make a motion study using fusion360
mechanism fusion360 best how joints revolute simulation

Fusion 360 Thermal Simulation of CPU Heatsink: Heat Transfer Analysis Tutorial

Engineering Juice
in FEM
7 0 Beginner
#Fusion360Tutorial #Fusion360Simulation #Fusion360ThermalSimulation Thermal simulation of a CPU chip which is attached to a heatsink in autodesk fusion 360. There is a CPU in red, attached to a PCB board and that is attached to the aluminum heatsink. A. Lets go to the simulation workspace first... B. Study materials- set materials C. Set Thermal Loads- Bodies- Select body of Chip D. Thermal load set in Watts for a consumer level CPU
transfer heat simulation 360 fusion

[VIDEO] Tutorial: How to model Metal Matrix Composites in an orthogonal cutting Simulation with Abaqus CAE

S. B.
in FEM
6 2 Beginner
How to achieve a orthogonal cutting Simulation of Metal Matrix Composites (MMC) with Abaqus CAE ? This tutorial shows how to achieve this, step by step ! If you like this, subscribe my channel at Youtube !
metal tutorial cutting cad cae abaqus mmc fem

Flow Simulation SolidWorks

Daniel Felipe Ovalle
in FEM
6 0 Beginner
Flow simulation of ball valve using FLow Simulation SolidWorks 2013

Non linear simulation with full explanation for beginners in solidworks

Amit Mourya
in FEM
5 0 Beginner
Support this channel on paypal : paypal.me/nobodyknow137 (i will be thankfull if i get some support) in this video you will learn how to do non linear simulation in solidworks we will first create a sketch and apply boundary conditions like friction , no indentation displacement after that we will define tge mesh as per our requirement to get the better result in our non linear simulation
engineering mechanical analysis element finite knowledge cad nonlinear basics deformation sheet how explained beginners solidworks simulation linear non

Torque load simulation with Solidworks

Ahmed Sakib
in FEM
5 0 Beginner
How to carry out torque load analysis with Solidworks simulation? Learn to apply torque load on a part? Evaluate stresses and displacement due to this toque load with Solidworks.
torque load simulation solidworks

ANSYS

Eslam Shamso
in FEM
5 0 Beginner
https://youtu.be/Az4hPtSuVRI

ANSYS Tutorials - Static Structural Analysis

Bhushan chougule
in FEM
5 0 Beginner
Example of basic Static structural linear analysis . #ansys #ansysworkbench #ansystutorial #ansysfluent #ansyscfx Please subscribe for daily videos on CAD/CAM/CAE software tutorials and projects.
cfd static structural fea fem cae ansys workbench ansys
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.