Tutorials

  • OBJ ×
  • Rhino ×
  • SpaceClaim ×

Create an OBJ Cube With Your Favorite Images

Anirudh Krishnakumar
in Modeling
17 2 Beginner
Ever wanted to create a CAD file with your favorite pictures? There are many ways to apply images and textures to CAD files. However, for most of these operations, expensive programs or CAD experience might be required. This tutorial shows you how to make a simple OBJ cube, while explaining some of the basic OBJ nomenclature. It then explains the steps to map pictures on the cube's faces. The only tools you will need is a text editor like notepad and your favorite images!
OBJ photo cube cad map texture obj

Tutorial: how to model revolving surfaces without degenerated point

Ferro
in Modeling
12 2 Intermediate
This tutorial shows how to reconstruct a portion of a revolving surface, in order to remove the degenerated point
Rhino patch boundary fair degenerated

SpaceClaim basic tutorial - spring

Verislav Mudrak
in Design & CAD
10 0 Beginner
How to make spring in SpaceClame
SpaceClaim tutorial basic spaceclaim

Video Tutorials from Rhino 3D Tutorials

Alexandre Galin
in Modeling
8 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/
Rhino surfacing 3d rhinoceros taught self tutorials prototyping rhino3d

Filling basic 6-sided holes in Rhino

Bobi
in Modeling
8 1 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.
Rhino rhino blend hole 6-sided surface surfacing nurbs transition

Make a Ring With Text in Rhino

JOSE
in Modeling
8 1 Expert
Make a ring with a text
Rhino rhino design jewelry

Tutorial: How to quickly add motion dynamics to any CAD model in SpaceClaim

Oskar Q
in Design & CAD
6 0 Beginner
Tutorial below
SpaceClaim tipsntricks

GIF : Guide to How to make Simple Single Collet ( Emerald Ring )

Patel Deepak
in Design & CAD
5 0 Intermediate
THE SERIES OF ANIMATED gif WILL GUIDE IN MAKING SIMPLET GRACEFUL RING.
Rhino educatinal solitaire emerald jewellery rhino ring

Make quickly a signet ring setting with a cabouchon

JOSE
in Modeling
5 1 Expert
Make a signet ring setting with a cabouchon. Quickly
Rhino jewelry

starlord Tutorial - image Pixel [ sampler ] with Rhino + Grasshopper

Matias Adrian Casciotta Gracia
in Modeling
4 0 Intermediate
éste es un Tutorial para convertir una imagen en geometrías tipo Pixel this is a Tutorial to convert an image into Pixel geometries Regards! subscribe! MATGICAL@blogspot.com f DigitalMagical magicaldigital Ig
Rhino programing image geometries modeling tutorial grasshopper rhinoceros pixel

The Length And Width Of A Ring .

Beauty Roy Mondal
in Design & CAD
4 0 Expert
How to measure the length and width of a ring . https://www.youtube.com/watch?v=0zKmm4ZYi10
Rhino model 3d animation rhino about tutorial jewelry width length ring

Introduction to Pave setting, and its basic knowledge.

Beauty Roy Mondal
in Modeling
4 0 Expert
What a Pave Setting Is The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle.
Rhino cam cad modeling fashion jewelry rhino settings diamond setting pave

How to model the StMary30st in Rhinoceros3D and show design intent.

Riccardo Gatti
in Design & CAD
4 1 Beginner
Here my explanation on how to do
Rhino building rhino3d skyscraper london designintent gerkin foster

How do i add thickness to a polyline in Rhinoceros 3D

Patel Deepak
in Design & CAD
4 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.
Rhino bending rhino wire

Use Ansys SpaceClaim to Model Twisted Pair Wire

Fineman
in Modeling
3 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.
SpaceClaim wire pair twisted spaceclaim
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.