Tutorials

  • SOLIDWORKS ×
  • mold ×

[VIDEO] SOLIDWORKS [Mold Arabic Tutorial - Plastic Product Extraction Using Direct Editing Tools]

Ahmed ElPrince
in Modeling
57 6 Expert
Hello Everyone and Welcome.. In This Tutorial you Will Learn How to Extract a Plastic Product from any Mold Using Direct Editing Tools inside SOLIDWORKS. Also this is one of the CSWPA-MM Exam Problem Idea if You Learned S.Thing New Please Like The Video and Share it With Your Friends. Also Subscribe For Seeing More Videos Like This.
SOLIDWORKS tricks editing direct tools mold solidworks

Tutorial: SolidWorks Mold Tools

Stephen Nyberg
in Modeling
24 3 Beginner
This Tutorial was written "Barney Style" so even the most novice of SolidWorks users should be able to follow easily. The files I created making this tutorial can be found here: http://grabcad.com/library/tutorial-solidworks-mold-tools
SOLIDWORKS mold

Mold Design | Making Blow Mold Design for PET Bottle

langgeng wahyu hidayat
in Design & CAD
23 3 Intermediate
Mold design, making blow mold design for PET bottle is more simple than extrusion blowing. Using a preform that is heated to 50 degrees Celsius, then blown by pressurized wind. Then the bottle is formed.
SOLIDWORKS design bottle mold blow

How to save multibodies as SolidWorks Parts

Sérgio CAD CAM
in Modeling
16 0 Beginner
How to save multibodies created during a mold construction to make the post assembly.
SOLIDWORKS solidworks injecao injection isopor eps molde mould mold

How to Create a Mold Using Interlock Surface

Sérgio CAD CAM
in Modeling
15 0 Beginner
How to draw a mold using Interlock Surfaces, very common in complex surfaces, when it's not possible to create a sketch in the Parting Surface; Como criar um molde no SolidWorks utilizando a superfície de Interloque, muito comum em moldes de peças complexas, quando não é possível criar um esboço na própria superfície de fechamento.
SOLIDWORKS isopor eps injecao injection molde mould mold

How to Make Blow Mold of Drinking Bottle

langgeng wahyu hidayat
in Modeling
12 3 Beginner
After making a drawing of a drinking bottle ( https://youtu.be/2p93ExMRKjI ), this video is to make construction of the bottle mold. Consists of two plates, 'body and bottom'. Given that the bottom of the bottle goes deeper, you need a bottom so it doesn't "undercut". Thank you Follow me: Youtube : https://www.youtube.com/@molding
SOLIDWORKS drinking bottle mold bottle blow mold

Water Case Modeling

CAD Zest
in Modeling
11 1 Beginner
Water Case Modeling
SOLIDWORKS mold rendering modeling

How creat mold in SolidWorks?

John Sahov
in Design & CAD
10 3 Beginner
How work with Mold tool commands. The simple way of creating camera mold.
SOLIDWORKS design mold

How to make a mold tool

Verislav Mudrak
in Design & CAD
8 0 Beginner
"How to make a mold tool" using the final product
SOLIDWORKS tool mold tutorial

How creat mold for bottle in SolidWorks?

John Sahov
in Design & CAD
8 1 Beginner
In this way we can create mold
SOLIDWORKS design mold

How you create a mold of a piece in SW ?

Fateh MERRAD
in Design & CAD
7 0 Beginner
This is the answer for a detailed tutorial for this question
SOLIDWORKS solidworks molding mold tutorial

Solidworks Mold Design - Indent

Dankın Bozkurt
in Modeling
7 0 Intermediate
solidworks kalıp çıkarma
SOLIDWORKS indent mold design mold solidworks

How to Use Ring Plate to Eject the Hydroponic Pot | Mold Design

langgeng wahyu hidayat
in Assemblies
6 0 Intermediate
Simulation about use ring plate to eject the hydroponic pot. See this video first about "Make Hydroponic Pot Mold with Ring Plate to Eject the Product" : https://youtu.be/JwnHpCsPuNw
SOLIDWORKS ejector plate ring plate pot assembly mold animation

how do I reverse a drawing?

Stephen Nyberg
in Design & CAD
6 0 Beginner
The AR is a bit more complex than is needed for this tutorial so I skipped a few steps that I did to prepare the model. I used http://grabcad.com/library/mil-spec-ar-15-lower by http://grabcad.com/toddaho and imported the .ipt file into SolidWorks.
SOLIDWORKS cnc mill mold negative

THERMOFORMING MOLD

langgeng wahyu hidayat
in Modeling
5 2 Intermediate
In this video, we learn how to create thermoforming mold. Forming of PET plastic sheet to any various plastik product like glass, lunch box, cake place, tray, etc. This process use vacuum air.
SOLIDWORKS box lunch tray plastic vacuum mold thermoforming
White Stratasys Logo White GrabCAD Logo
© 2026 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.