Tutorials

Small

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

1 0 Beginner
Here is the tutorial.
Small

Press tool assembly in nx

1 0 Beginner
Press tool assembly in nx by top down method
Small

Tutorial 96: 2D ENF with XFEM method

1 0 Intermediate
The end notched flexure (ENF) test has been designed in order to obtain inter-laminar fracture toughness under in-place shear deformation mode called as Mode II. Agenda: Modelling ENF beam Modelling bulk fracture which permits a crack to be located in the element interior Plotting Load-Displacement Curve Comparing Result with cohesive element results Check below link for the full tutorial: https://www.udemy.com/abaqus-tutorial-intermediate/?couponCode=GRABCAD
Small

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 1?

0 0 Beginner
Here is the Tutorial.
Missing small

Tutorial 49: Using rules method to reselect elements within element sets ACP composite material

0 0 Intermediate
Please check my Youtube channel:
Small

Tutorial 94: 2D DCB with XFEM method

0 0 Intermediate
This is a popular test in order to determine mode I fracture energy of adhesive bonds, which is a measurement of the fracture toughness in the presence of pre-crack. In this tutorial, you will learn how to use XFEM theory to make pre-crack. Agenda: Modeling Double Cantilever Beam Modeling bulk fracture which permits a crack to be located in the element interior Plotting Load-Displacement Curve Comparing Result with cohesive element results Check below link for the full tutorial: https://www.udemy.com/abaqus-tutorial-intermediate/?couponCode=GRABCAD
Small

Tutorial - Modeling Flower in SolidWorks using Surfacing?

0 0 Beginner
Here is the tutorial.
Missing small

Tutorial SolidWorks Simulation: Truss Analysis by Method of Joints

0 1 Beginner
Video on YouTube,
Small

Tutorial 92: Single Lap Joint (Surface based Cohesive)

0 0 Intermediate
Adhesive joints attract more attention due to their advantage of enabling the development of lightweight, cost-effective and highly integrated structures with a more uniform load distribution and improved damage tolerance. The SLJ has been the most studied in the literature, on experimental and theoretical terms, due to its facilitated fabrication. But that does not mean the tensions present in the joint are easy to analyze. The aerospace area was the first sector that promoted the use of adhesives in the aircraft manufacturing process, due to its outstanding advantages over traditional methods such as welding or bolting. many types of commercial aircraft whose economical operations benefit considerably from the reduced weight offered by the bonded composite assemblies. Agenda: Modelling Single Lap Joint Creating Cohesive interaction Property Creating Cohesive Surface-Surface contact Plotting Load-Displacement Curve Plotting Stress on Bond-line path Check below link for the full tutorial: https://www.udemy.com/abaqus-tutorial-intermediate/?couponCode=GRABCAD