Feed

Tutorial - Modeling Flower in SolidWorks using Surfacing?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Front Plane >> Sketch.

  2. Step 2:

    Draw a spline and center line.

  3. Step 3:

    Revolved surface it.

  4. Step 4:

    Top plane >> Sketch.

  5. Step 5:

    Draw this profile.

  6. Step 6:

    Select Trim surface under surfaces tab.

  7. Step 7:

    Trim the outside surface of the profile.

  8. Step 8:

    Thicken under surfaces tab.

  9. Step 9:

    Select the leaf and then thicken it.

  10. Step 10:

    Reference Geometry >> Axis.

  11. Step 11:

    Select top plane and origin. Click OK.

  12. Step 12:

    Circular pattern.

  13. Step 13:

    Select the thicken body as the body to be patterned about the axis 6 times.

  14. Step 14:

    Top plane >> Sketch.

  15. Step 15:

    Draw a circle.

  16. Step 16:

    Extrude it.

  17. Step 17:

    Click Dome under features tab.

  18. Step 18:

    Top face of the extrusion and dome it.

  19. Step 19:

    We have the flower body created.

Comments

Please log in to add comments