Ishaan Bhasin

College student trying to make most out of my Designing skills.

17

Delhi, India

Tutorials

SolidWorks | Final Challenge - Designing Differential Gearbox

in BOM

1 0 Expert

This is the last exercise of the 30 Days Solidworks Challenge. This real-life project will help you to apply all Solidworks 2D and 3D tools that you have learned throughout the course.

SolidWorks | Challenge 29

in Modeling

1 0 Intermediate

This is the 29th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1. What is a slot? 2. What are the parameters to make a plane at an angle? 3. Is it always necessary to select a plane to use the mirror command?

SolidWorks | Challenge 28

in Modeling

0 0 Intermediate

This is the 28th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1.What pattern feature was used while creating this design? 2.What are the parameter required for that pattern feature?

SolidWorks | Challenge 27

in Modeling

0 0 Intermediate

This is the 27th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1. For what the eye option used? 2. What is an offset tool? 3. Can we revolve boss/bass the sketch if any point is open?

SolidWorks | Challenge 26

in Modeling

0 0 Intermediate

This is the 26th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1.What do you need to sketch to create a centerline between two existing parallel edges 2.What is "Convert Entities" and where it is used? 3.What Are The Commonly Used Tools In SolidWorks Surface?

SolidWorks | Challenge 25

in Modeling

0 0 Beginner

This is the 25th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1.Which is NOT a reference geometry feature? 2.What keyboard shortcut do you use to zoom out? 3.When changing a dimension the model displayed change?

SolidWorks | Real-life Project Challenge

in Assemblies

2 0 Intermediate

This is the 24th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1. What are the End Conditions for extrusion? 2. When you work with a part, how many coordinate systems can you insert? 3.Which of the feature represents a dotted line?

SolidWorks | Challenge 23

in Modeling

0 0 Intermediate

This is the 23rd exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1.What is the first step you do before starting a new sketch? 2.An unsolvable sketch turns what color?

SolidWorks | Challenge 17

in Modeling

0 0 Intermediate

This is the 17th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1.Key parameters to keep in mind while revolving? 2.Key parameters to keep in mind to use pattern command? 3.Is it always necessary to take a plain to use mirror command?

SolidWorks | Challenge 22

in Modeling

1 0 Intermediate

This is the 22nd exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1.Which feature will create a solid part from a single sketch? 2.When you create a boss-extrude, what parameters you can specify? 3.How does SolidWorks store parts?

SolidWorks | Challenge 21

in Modeling

0 0 Beginner

This is the 21th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1. How many sketches were made to create this design? 2. How many planes are used to create this design? 3. Where do you change the unit system?

SolidWorks | Challenge 20

in Modeling

0 0 Intermediate

This is the 20th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1. What do you mean by loft? 2. Key parameter to keep in mind to use loft command? 3. By default, what does the Space key do?

SolidWorks | Challenge 19

in Modeling

0 0 Beginner

This is the 19th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1. How many types of mates are there? 2. Can you mirror bodies? 3. Which is not a type of reference geometry?

SolidWorks | Real-Life Project Challenge

in Assemblies

1 0 Intermediate

This is the 18th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1.Key parameters to keep in mind while revolving? 2.Key parameters to keep in mind to use pattern command? 3.Is it always necessary to take a plain to use mirror command?

SolidWorks | Challenge 16

in Modeling

1 0 Intermediate

This is the 15th exercise of the 30 Days Solidworks Challenge. In the next coming days, you will learn all Solidworks 2D and 3D tools that are required for you to start with SolidWorks. Here is the quiz question for this video, Answer it in the comment section. 1.What are the two parameters required for the sweep boss feature to work? 2. Was there a need for that extra line for the sweep cut command? 3.How did we mirrored the upper surface of the sketch?

© 2025 Stratasys Inc.

ABOUT US

Company

Jobs

RESOURCES

Blog

Resource Center

Support

GrabCAD Software Support

GrabCAD Community Support

SOCIAL

Facebook

Youtube

Instagram

Linkedin

Twitter

Streamline Pro

Overview

Control

Overview

Print

Overview

Pro

GrabCAD Print for FDM

GrabCAD Print for PolyJet

Digital Anatomy

SAF Technology

Origin

GrabCAD Print for Neo

fixturemate by trinckle

Shop

Overview

Features

Compare

Teachers & Lab Managers

IT & Security

Engineering Managers

PARTNERS

Software Partners

GrabCAD SDKs

COMMUNITY

Library

Challenges

Groups

Questions

Tutorials

Engineers

Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD

The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.