Feed

Tutorial - Making iPhone 4s in SolidWorks Part 2?

Tutorial by Sudhir Gill
Small

Here is the second part.

  1. Step 1:

    Front face >> Sketch.

  2. Step 2:

    Draw a circle of 4.8mm dia.

  3. Step 3:

    Extrude cut by 1mm at draft of 50º.

  4. Step 4:

    Front face >> Sketch.

  5. Step 5:

    Convert the edge.

  6. Step 6:

    Extrude it by 0.25 at 50º draft.

  7. Step 7:

    Front face >> Sketch. Hide the previous extrusion.

  8. Step 8:

    Draw a circle of 2mm dia.

  9. Step 9:

    Split line and select the inner face.

  10. Step 10:

    Hide the extrusion body.

  11. Step 11:

    Dome the inner surface by 0.40mm.

  12. Step 12:

    Top face >> Sketch.

  13. Step 13:

    Draw a slot.

  14. Step 14:

    Extrude cut it by 0.50mm.

  15. Step 15:

    Inner face >> Sketch.

  16. Step 16:

    Offset the edge by 0.25mm.

  17. Step 17:

    Extrude it by 1.10mm without merging result.

  18. Step 18:

    Chamfer the edge by 0.20mm at 45º.

  19. Step 19:

    Left face >> Sketch.

  20. Step 20:

    Draw a rectangle and fillet its's corners.

  21. Step 21:

    Draw another circle.

  22. Step 22:

    Draw 2nd circle.

  23. Step 23:

    Extrude cut them by 0.50mm.

  24. Step 24:

    Inner face >> Sketch.

  25. Step 25:

    Draw a slot.

  26. Step 26:

    Draw two circles.

  27. Step 27:

    Extrude them by 1.10mm.

  28. Step 28:

    Chamfer the edge by 0.2mm at 45º.

  29. Step 29:

    Circular face >> Sketch.

  30. Step 30:

    Draw this sketch.

  31. Step 31:

    On lower circle draw this sketch using slot.

  32. Step 32:

    Extrude cut by 0.2mm.

  33. Step 33:

    Here is third part.
    http://grabcad.com/questions/tutorial-making-iphone-4s-in-solidworks-part-3

Comments

Please log in to add comments