Feed

Tutorial - Making iPhone 4s in SolidWorks Part 5?

Tutorial by Sudhir Gill
Small

Here is the fifth part.

  1. Step 1:

    Inner face >> Sketch.

  2. Step 2:

    Draw a rectangle.

  3. Step 3:

    Extrude it by 1.50mm.

  4. Step 4:

    Front face >> Sketch.

  5. Step 5:

    Change vision to hidden line visible. Convert the edge and convert it to construction. Draw a rectangle taking it reference.

  6. Step 6:

    Linear pattern it at a distance of 0.5mm 30 times.

  7. Step 7:

    We have the pins.

  8. Step 8:

    Split Line and select this face. Click OK.

  9. Step 9:

    Now the pins are generated.

  10. Step 10:

    Right face >> Sketch.

  11. Step 11:

    Draw a slot.

  12. Step 12:

    Split line and project it on right face.

  13. Step 13:

    The slot face >> Sketch.

  14. Step 14:

    Draw a circle.

  15. Step 15:

    Extrude cut by 1.8mm.

  16. Step 16:

    Front face >> Sketch.

  17. Step 17:

    Draw a rectangle.

  18. Step 18:

    Fillet the edges.

  19. Step 19:

    Curve >> Split line.

  20. Step 20:

    Project it on Front face.

  21. Step 21:

    Back face >> Sketch.

  22. Step 22:

    Use spline tool and make this sketch.

  23. Step 23:

    Project it on the back face.

  24. Step 24:

    We have iPhone 4s in SolidWorks.

  25. Step 25:

    Whow the boss-extrude.

  26. Step 26:

    Now apply different appearance to different faces and iPhone 4s is ready.

Comments

Please log in to add comments