Tutorials

  • Drafting ×
  • Assemblies ×
  • 3D Printing ×
  • Process Simulation ×

3D Printing Design Guidelines

Mohit
in 3D Printing
211 16 Beginner
3D Printing Design Guidelines ~ 9 Steps to consider while design for 3d Printing.
designer guidelines design printing 3d

Amazing Dynamic foldable tabel in solidworks

Amit Mourya
in Assemblies
70 6 Beginner
Support us on paypal so we can create better content : paypal.me/nobodyknow137 circular table is folding here is shown it is quite interesting new mechanism The advantage of this mechanism it take less space as compare to other it is easy to fold if you compare with other ones easy to fold less space good interior design material interior design cool impression on guest cool solidworks project for dynamic analysis
SOLIDWORKS interior analysis motion animation design interesting foldable dynamic solidworks table folding

Cap screws and machine screws

dea
in Drafting
67 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

How to 3D Print Textured Objects Inside Clear Plastic Blocks

Shuvom Ghose
in 3D Printing
58 9 Expert
This walkthrough explains how to print fully textured CAD files encased inside transparent blocks, to help support complex parts, show vistas you never thought possible, or just increase the usability of your full-color models!
rocket transparency series j8 polyjet clear stratasys j750

How to 3D Print Jigs & Fixtures, Part 2: Designing for Print

Shuvom Ghose
in 3D Printing
56 6 Beginner
This is the second part of a four-part tutorial series on how to optimize your manufacturing jigs & fixtures for 3D printing. Today, we'll go over what to do in each design pass as you're optimizing your part, including specific steps to do in your CAD package, your print-preparation tool, and if you're bold, your FEA package. Later installments of this series will deal with FDM material selection and post-processing for jigs & fixtures.
fdm stratasys printing 3d fea solidworks fixtures jigs

(VIDEO TUTORIAL) Solidworks Tutorial #155 How to Design a JET GAS TURBINE Assembly (Engine) in Solidworks Easy Design

Praveen Kumar
in Assemblies
49 9 Intermediate
Full Assembly Jet Gas Turbine Engine . Part Two Available on our YouTube Channel................. I hope you like this Tutorials This Tutorial Made by Request for Collage Students I'm always upload easy way drawing not hard. And unique trick friends. So please Subscribe & Share every Friends.
SOLIDWORKS mechanical engineering rendering modeling design assembly solidworks

SOLIDWORKS - Assembling A Mechanism, With Motion Analysis and Tracing Point of a Motion of Mechanism.

Ahmed ElPrince
in Assemblies
50 0 Expert
SOLIDWORKS Motion Analysis Tutorial - Assembling A Mechanism ((Trammel of Archimedes-Ellipse Generator Mechanism)),With Motion Analysis and Tracing Point of a Motion of Mechanism After Watching This Video and applying with me You Will Understand Standard Mates ((with using Shortcuts)) ---Trammel of Archimedes Mechanism ( You Can Download The Parts From Here ) https://grabcad.com/library/trammel-o... - How To Add Motor in Motion Analysis. - How To Make Mechanism Tracing. - If This Video Makes You Understand S.Thing New Please Like it & Subscribe For More. - And if You Have Any Questions or Any Suggestions Write a Comment.!
SOLIDWORKS assembly solidworks study point tracing analysis motion mechanism

{​VIDEO Tutorial}​ Industry Robot Arm

Mr Hieu Phuong
in Assemblies
48 1 Beginner
Video Tutorial series teaching you how to create an Industry Robot Arm!
SOLIDWORKS industry assembly arm robotic learn 2019 tutorial solidworks

Printing Full-Color FEA Results on 3D Printers

Shuvom Ghose
in 3D Printing
46 7 Beginner
Ever wanted to see, feel, and handle your FEA results in the best way to share them with colleagues and students? This tutorial goes through the steps how to use SOLIDWORKS Simulation and GrabCAD Print to print full-color FEA results on polyjet color printers such as the J750. It's a lot easier than you think!
j55 simulation solidworks vrml polyjet j750 fea

TURBOFAN | TURBINE IN CATIA

Avnish Kumar (अवनीश कुमार )
in Assemblies
44 12 Expert
The Rolls-Royce Trent 900 is a high bypass turbofan produced by Rolls-Royce plc to power the Airbus A380, competing with the Engine Alliance GP7000. Initially proposed for the Boeing 747-500/600X in July 1996, this first application was later abandoned but it was offered for the A3XX, launched as the A380 in December 2000.
CATIA autocad solidwork v6 v5 catia turbofan turbine

Airplane propeller - ceiling lamp – 3D printed project

Dape
in 3D Printing
44 2 Intermediate
3D printed airplane propeller as a ceiling lamp (decoration). Project is not finished yet, bulb has to be added, some kind of holder, electricity...
airplane 3d printing ceilinglamp lamp household propeller

[Tutorial Video] Servo Motor Assembly

Mr Hieu Phuong
in Assemblies
40 1 Beginner
Servo Motor Assembly
SOLIDWORKS

Schleicher glider - 3D printed and painted

Dape
in 3D Printing
39 7 Intermediate
3D printed and painted Schleicher K7 glider model, step by step procedure.
model airplane airbrush printing 3d k7 schleicher glider

How to Create Incredibly Complex Textured Shapes for 3D Printing, Using Bump Mapping

Shuvom Ghose
in 3D Printing
37 5 Expert
This tutorial covers how to use 2D images to create actual 3D depth and physical textures on your CAD parts and then 3D print them. Mainly we use Rhino to do the displacement-mapping, but Photoshop could be used as well. Files were then printed in full color on a Stratasys J750.
j55 polyjet j750 rhino stratasys displacement texture bump

Designing for FDM Production Parts

Stratasys
in 3D Printing
37 0 Beginner
This best practices tutorial concentrates on factors that impact the quality, value, and performance of FDM production parts. There are a number of design considerations, material choices and performance objectives that should be taken into account when designing for additive manufacturing. Tailoring these decisions to the FDM manufacturing process allows the benefits of FDM to be maximized.
designing parts stratasys production fdm
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.