Tutorials

  • Autodesk 123D ×
  • Fusion 360 ×
  • STEP / IGES ×
  • 3d ×

I Built a Military Robot

Engineering Juice
in Process
43 6 Intermediate
Mobile, military robot optimized for use in desert environments which can be controlled remotely or autonomously and can collect/ stream video to a VR headset via its front mounted camera. The method of movement is a continuous track, created using steel roller chain connected by fasteners with 3D printed links. These loops sit on a custom designed drive sprocket and idler sprocket with 4 shock absorber loaded roller pins that act as the suspension system. The drive motors are powered by '18650' batteries, directed by a raspberry pi 4 and connected to a motor controller. For connectivity, a mobile device can connect to the pi's external antenna as it is a WiFi access point. From here, directions can be sent to the robot from the mobile device using the Node Red GUI and additionally, the entirety of the main raspberry pi computer can be accessed for the use of sending custom commands for autonomous movement.
Fusion 360 printed 3d rc programming pi raspberry electronics 360 fusion robot robotics

Fusion 360 Excercise 15 | CAD | Beginners Practice | BK Engineering

Bhargava Krishna Marripati
in Modeling
7 0 Beginner
This is a video series where we practice CAD exercises for Fusion 360. In this video, we will practice 3d CAD modeling in Fusion 360 Download exercise file: https://forms.gle/Kx7mRBeedvgDhCQL7 Sign up for a Course: https://forms.gle/VLAcKHTxTa36siki7 Fusion 360 Excercise playlist: https://youtube.com/playlist?list=PLce2CHQ7yyu2TO5LfGKg3vVmIRd7pNFQX For more info please contact us at 7981328897 Email us at info@bk-engineering.in Follow us Instagram- https://www.instagram.com/bkengineeri... Twitter- https://twitter.com/BkengineeringI Facebook- https://www.facebook.com/bkengineerin... Website- https://bk-engineering.in/ #fusion360 #excercise #bkengineering
Fusion 360 excercise practice 3d engineering bk tutorial 360 fusion modelling

Dice Modelling using Fusion 360.

prashant kumar
in Modeling
6 0 Beginner
Dice design using Autodesk Fusion 360 , ready for 3D printing. Step wise instructions for beginners of Fusion 360. Enjoy and Keep learning :) Let me know if you have any queries or question.
Fusion 360 design industrial desing product dice designing print modelling 3d autodesk 360 fusion

Where To Get Texture Material | Make Own Custom Material Fusion 360 | 2021 |

vikram ahuja
in Modeling
5 1 Beginner
Hi Guys, In this video, I am going to tell you that how can you Learn Where To Get Texture Material | Make Own Custom Material Fusion 360 | 2021 | I have taught you how to Where To Get Texture Material | Make Own Custom Material Fusion 360 | 2021 | which will make you understand in simple way. If you want to learn Fusion 360 software and If you want more tutorials, Then you can also subscribe my Youtube Channel, Whose link I have given you below. My Youtube Channel Name is: Ahuja Technical Hant https://youtu.be/E7LpU4vcgq8
Fusion 360 360 fusion learn 3d tutorial material texture get modeling cad fusion360

3D Sketch

Er. Gaya Prasad Kurmi
in Modeling
4 1 Beginner
3D Sketch | Autodesk Fusion360|
Fusion 360 fusion360 autodesk modelling sketch 3d

3D Printed MeanWell Power Supply Bracket for Creality Ender 3: Fusion 360 Tutorial in Modeling Parts

Engineering Juice
in Modeling
4 0 Beginner
#3DPrint #3DPrinting #Ender3 (Material presented is for entertainment purposes only. I am not responsible for any injury or damage caused by installation, use or misuse of these devices.) We will model and assemble our own 3D printed brackets that allow the MeanWell power supply to be attached to the underside of the Ikea Lack table.
Fusion 360 print printer printing 3d tutorial 360 fusion

How to design your own support structures for FDM printing

Andreas Bastian
in Design & CAD
4 1 Intermediate
See below for a method to manually model support structures.
Fusion 360 fff structures fdm dfm printing support design 3d

mesh using pipe comment in autodesk fusion360

kiran
in Modeling
3 0 Intermediate
here you can find how to make a steped mesh using pipe comment in fusion360
Fusion 360 tutorial printing 3d cad autodesk pattern mesh how fusion360

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

Engineering Juice
in Assemblies
3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.
Fusion 360 printing print 3d screw gears motor dc design tutorial 360 fusion

Turbine Blade - Fusion 360 Tutorial

Didi Widya Utama
in Modeling
3 0 Intermediate
This video show step by step how to create the 3D model of the turbine blade, i used the coil to captured the sipral 3D path for guide to create the blade. Disclaimer : this video just to show the method to create the 3D model, the design and dimensions itself doesn't reflect on the real turbine blade.
Fusion 360 turbo blade turbine learning fusion360 cad modeling 3d tutorial

Bottle holder - Fusion 360 tutorial

Didi Widya Utama
in Modeling
2 0 Intermediate
This video to continue the previous video, which in this video demonstrate how this wire type of bottle holder was created. use many technique to create the 3d surface and use it to create the pipe command from the edges of the surface.
Fusion 360 surfacing sketch 3d tutorial 360 fusion bicycle drinking holder bottle

Knurling modeling in Fusion360

Er. Gaya Prasad Kurmi
in Modeling
2 1 Beginner
Knurling modeling in Fusion360
Fusion 360 knurling fusion360 autodesk modeling 3d

Re-Designing The Nozzle Cooling Duct on Ender 3/ Sovol SV1 in Fusion 360: Tutorial in Modeling Parts

Engineering Juice
in Modeling
2 0 Beginner
We will be redesigning the air scoop to work more effectively.
Fusion 360 ender print printing 3d modeling tutorial 360 fusion

Sheet Metal bend fold unfold in Autodesk Fusion 360

vikram ahuja
in Modeling
2 0 Beginner
Hi Guys, In this video, I am going to tell you that how can you Learn Sheet Metal bend fold unfold in Autodesk Fusion 360. I have taught you how to Learn Sheet Metal bend fold unfold in Autodesk Fusion 360, which will make you understand in simple way. If you want to learn Fusion 360 software and If you want more tutorials, Then you can also subscribe my Youtube Channel, Whose link I have given you below. My Youtube Channel Name is: Ahuja Technical Hant https://www.youtube.com/channel/UClh7lX8d70gIwoA7z5Tt2Yg https://youtu.be/BinANRlCG2A
Fusion 360 3d metal sheet modeling cad fusion360

Fusion 360 Excercise 14 | CAD | Beginners Practice | BK Engineering

Bhargava Krishna Marripati
in Modeling
2 0 Beginner
This is a video series where we practice CAD exercises for Fusion 360. In this video, we will practice 3d CAD modeling in Fusion 360 Download exercise file: https://forms.gle/Kx7mRBeedvgDhCQL7 Sign up for a Course: https://forms.gle/VLAcKHTxTa36siki7 Fusion 360 Excercise playlist: https://youtube.com/playlist?list=PLce2CHQ7yyu2TO5LfGKg3vVmIRd7pNFQX For more info please contact us at 7981328897 Email us at info@bk-engineering.in Follow us Instagram- https://www.instagram.com/bkengineeri... Twitter- https://twitter.com/BkengineeringI Facebook- https://www.facebook.com/bkengineerin... Website- https://bk-engineering.in/ #fusion360 #excercise #bkengineering
Fusion 360 excercise practice 3d engineering bk tutorial 360 fusion modelling
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.