Tutorials

  • DraftSight ×
  • Kompas-3D ×
  • PTC Creo Elements ×

Параметризация модели через переменные в "Компас-3D"

Egor Chugay
in Modeling
14 0 Intermediate
Tutorial relevant for users "Kompas-3D". I don't know if they "Kompas-3D" is used in other countries, but I know "Kompas-3D" most popular in Russia, so further explanation will be in Russian. If you need English version, please comment tutorial, and I make translate. В данной заметке рассмотрено построение параметрической модели на примере корпуса микросхем типа QFP, модель строится в САПР «Компас-3D». Представленный ниже способ - лишь один из многих возможных. И я искренне надеюсь, что кому-то он поможет лучше разобраться 3D моделированием, а кто-то увидит, как оптимизировать процесс. Несмотря на то, что построение модели выполнялось в «Компас-3D», подобные механизмы могут присутствовать и в иных системах, так что возможно пригодится пользователям другого ПО. Описанный ниже способ предполагает наличие определенного навыка работы с 3D моделями, и не содержит подробного описания последовательностей нажатия клавиш, скорее описана методика построения и взаимосвязь объектов.
Kompas-3D qfp tutorial parametric kompas-3d

how to perform analysis test on ansys software

harikrushna dodiya
in Design & CAD
13 1 Intermediate
This is modal analysis of impeller step
PTC Creo Elements

Tutorial on Modeling and Simulation of standard gear

Milan Ilić
in Design & CAD
6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...
PTC Creo Elements gear standard simulation tutorial engineer pro parametric creo

Tutorial: How to add exploded view in drawing?

Milan Ilić
in Design & CAD
5 0 Intermediate
How to add exploded view in drawing?
PTC Creo Elements drawing exploded view creo pro-e

How to change from inch im mm in creo 2.0?

anhquoc38
in Design & CAD
5 0 Beginner
tutorial: see the img.
PTC Creo Elements inch cad creo unit change millimeter

Creating a Worm Wheel in Creo Parametric 1.0

c0cd00a1
in Design & CAD
5 0 Beginner
Here's the answer for it..
PTC Creo Elements creo parametric 1-0

Tutorial - how to make a spiral sphere

Flaviano Crespi
in Design & CAD
4 0 Beginner
This tutorial was compiled with Creo Elements / Direct Express to implement a model similar to my file: http://grabcad.com/library/spiral-sphere You can download a free fully functional copy of Creo from PTC site: http://www.ptc.com/products/creo-elements-direct/modeling-express/ Creo is completely "history-free" and uses the so-called "explicit modeling".
PTC Creo Elements

Sweep with multiple sections

Sumit Luthra
in Design & CAD
3 0 Beginner
For this we have to use swept blend command.
PTC Creo Elements section sweep pro multiple blend

Tutorial - Making text emboss on the curved surface in Creo Elements/Pro aka Pro Engineer Wildfire?

Sudhir Gill
in Design & CAD
3 1 Beginner
Here is the tutorial.
PTC Creo Elements solid surface wildfire creo elements text engineer pro tutorial curved bend extrude emboss flatten quilt

Tutorial: How to change the units from inch to mm in CREO?

Milan Ilić
in Design & CAD
2 0 Intermediate
ja sam u Creo Parametric 2.0 menjao ovako.. C:\Program Files\PTC\Creo 2.0\Common Files\M070\creo_standards\zatim pokrenuo configure i odabrao 5 (vidi sliku)
PTC Creo Elements inch mm change enginner pro parametric creo units

Tutorial - Modeling rope in Creo Elements aka Pro/E

c0cd00a1
in Design & CAD
2 0 Beginner
Steps for creating a rope in creo parametric 1.0
PTC Creo Elements modeling wildfire creo elements engineer pro tutorial

Tutorial: Circular Welded Helical Spring

Sumit Luthra
in Design & CAD
2 0 Beginner
Now Here is the solution to this problem.. Download Model: http://grabcad.com/library/circular-helical-spring
PTC Creo Elements spring circular pro-engineer helical sweep welded ends

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

Sudhir Gill
in Design & CAD
2 0 Beginner
Here is the tutorial.
PTC Creo Elements modeling surface wildfire flower engineer pro tutorial method

Tutorial - Creating Conic surfaces using shoulder curves in Creo Elements/Pro aka Pro Engineer Wildfire?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the Tutorial.
PTC Creo Elements surface wildfire creo elements curve engineer pro tutorial using shoulder conic sided patch

Tutorial - Modeling Bolt with terminating thread in Creo Elements aka Pro/E?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the tutorial.
PTC Creo Elements modeling bolt thread wildfire engineer pro tutorial terminating
White Stratasys Logo White GrabCAD Logo
© 2026 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.