Tutorials

  • OBJ ×
  • Powermill ×
  • SolidFace ×
  • Rendering ×

problem : powermill changes the orientation of files imoprted in igs format from solidworks

Sourbh
in Design & CAD
1 0 Intermediate
Don't worry about the orientation just simply rotate it through your mouse. and If you are thinking of wrong axis direction than just follow these steps:-
Powermill solidworks powermill

How to add a label onto a surface in Keyshot without bleedover to other surfaces?

Ahmed Zawad Ul Hoque Shovon
in Design & CAD
1 1 Intermediate
The following is an easy way to do it in KeyShot itself..Hope it helps...
Rendering label keyshot surface rendering solidworks

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 1 Intermediate
Links To provide for more efficient movement of the tool across the component the link moves that connect adjacent tool tracks can be defined in several different ways. Short/Long Threshold - This defines the distance limit up to which the Short - Links apply. Any move from the end of a tool track to the start of the next, which exceeds this distance is defined as a Long - Link move. For Short links the available options include Safe Z, Incremental, Skim, On Surface, Stepdown, Straight, and Circular Arc. For Long links the available options include Safe Z, Incremental, and Skim. Safe links apply only at the start and end of a toolpath the available options being Safe Z, Incremental, and Skim. For applications where a machine control system will permit arc fitting of rapid moves the Arc Fit Rapid Moves box can be ticked along with a suitable Radius based on the active tool diameter TDU (Of particular benefit to High Speed Machining). •Activate the toolpath 1_1 created earlier in the Leads section. •Set the Leads In and Out to None, if not already set. Press Apply.
Powermill paths sourbh powermill lead links tool

How to produce animated avatar pics?

Danny Tasmakis
in Design & CAD
1 0 Beginner
You can do the same thing in 'Gimp', it's free and easy.
Rendering

35Tutorials'''' KeyShot tips(Step By Step)"''

Alireza SKH
in Design & CAD
1 0 Beginner
KeyShot 3.1: The New, Extremely Fast Metallic Paint
Rendering

35Tutorials'''' KeyShot tips(Step By Step)"''

Alireza SKH
in Design & CAD
1 0 Beginner
Rendering White materials.
Rendering

35Tutorials'''' KeyShot tips(Step By Step)"''

Josh Mings
in Design & CAD
1 0 Beginner
Here's how to change existing materials to custom materials... so easy. It's important to note that all materials in KeyShot are scientifically accurate materials with properties added to be the most realistic possible. Also, if you're looking for more settings on your materials, you can select the 'Advanced' Material Type in the pulldown, located next to the material thumbnail in the Materials options.
Rendering

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Z Heights Skim and Plunge distance provide variable control of rapid move heights within a component. These operate in conjunction with Safe Z and Start Z to minimize slow and unnecessary movement of the tool in fresh air while machining the component form. Skim distance – An incremental distance above the model at which rapid moves occur from the end of one tool track to the start of the next. The tool rapids across the model clearing the highest point along its route by the Skim value. Plunge distance – An incremental distance above the local component surface where a downward rapid movement of a tool changes to plunge rate.
Powermill paths sourbh powermill lead links tool

Exercise 7 || 90 Degree PVC Equal Tee

ARVIND KUMAR
in Modeling
0 0 Beginner
Designing 90 Degree PVC Equal Tee using solidwork. A pipe tee is used for distributing or collecting the fluid from the run pipe. It is a short piece of pipe with a 90-degree branch at the center. Two types of Tee are used in piping: Equal / Straight Tee and Reducing / Unequal Tee.
SolidFace designing solidwork 90 degree equal tee equal tee

35Tutorials'''' KeyShot tips(Step By Step)"''

Alireza SKH
in Design & CAD
0 0 Beginner
Free 3D Environment for KeyShot
Rendering

how to reduce time involve in plunge in power mill

Sourbh
in Design & CAD
0 0 Beginner
There it is, but I need the solid model to Tell you detail process of Reducing the plunge milling.
Powermill

35Tutorials'''' KeyShot tips(Step By Step)"''

Yannick Herinckx
in Design & CAD
0 0 Intermediate
render using keyshot
Rendering

Tutorial title: SolidFace Professional Training Tutorials #02

SolidFace Technology
in Design & CAD
0 0 Beginner
Welcome to the SolidFace Professional Training! Moving on at our lessons in 2D CAD, we'll get more profound on the commands: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition. Bem-Vindos ao Treinamento da SolidFace Profissional! Dando continuidade as nossas lições no CAD 2D, os features serão: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition.
SolidFace drawing engineering software 2d cad 3d tutorial solidface

35Tutorials'''' KeyShot tips(Step By Step)"''

Alireza SKH
in Design & CAD
0 0 Beginner
Texturing overview Part1
Rendering

Adding textures to models' surface

William
in Design & CAD
0 0 Beginner
Here I will do it this way.
Rendering solidworks rendering catia textures
White Stratasys Logo White GrabCAD Logo
© 2026 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.