Tutorials

  • OBJ ×
  • Rhino ×
  • VectorWorks ×

Tutorial: how to model revolving surfaces without degenerated point

Ferro
in Modeling
12 2 Intermediate
This tutorial shows how to reconstruct a portion of a revolving surface, in order to remove the degenerated point
Rhino patch boundary fair degenerated

GIF : Guide to How to make Simple Single Collet ( Emerald Ring )

Patel Deepak
in Design & CAD
5 0 Intermediate
THE SERIES OF ANIMATED gif WILL GUIDE IN MAKING SIMPLET GRACEFUL RING.
Rhino educatinal solitaire emerald jewellery rhino ring

starlord Tutorial - image Pixel [ sampler ] with Rhino + Grasshopper

Matias Adrian Casciotta Gracia
in Modeling
4 0 Intermediate
éste es un Tutorial para convertir una imagen en geometrías tipo Pixel this is a Tutorial to convert an image into Pixel geometries Regards! subscribe! MATGICAL@blogspot.com f DigitalMagical magicaldigital Ig
Rhino programing image geometries modeling tutorial grasshopper rhinoceros pixel

How do i add thickness to a polyline in Rhinoceros 3D

Patel Deepak
in Design & CAD
4 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.
Rhino bending rhino wire

Filling 6-sided holes in Rhino

Bobi
in Modeling
3 0 Intermediate
This tutorial shows how to fill a 6-sided hole surrounded by complex surface transitions in Rhino.
Rhino transition nurbs surfacing surface 6-sided hole blend rhino

How to measure in Rhino?

Patel Deepak
in Design & CAD
2 2 Intermediate
Dimensions always measure as though the object were projected to the current construction plane. 1. use linear dimension for measuring length and width measurements. 2. use aligned dimension for diagonal measurements.
Rhino

Split Ring Shank Design Modeling in Rhino 3D (2018): Jewelry CAD Design Tutorial #42

PJ Chen
in Modeling
2 0 Intermediate
You will learn how to design a split ring with bead set on the ring shank in this tutorial. Suggested videos: Bezel Set tutorial ►►https://youtu.be/vuWBSxwdBw8 Halo Ring tutorial ►►https://youtu.be/VPT1LdA4vos Signet Ring tutorial ►► https://youtu.be/fsbqZH-hSlE Prong Set Tutorial ►► https://youtu.be/qxDI_7-tGHQ This tutorial is done by Rhino 6. The exact commands can be used with Rhino 5 and older version. PJ Chen Design Channel is about sharing Rhino 3D tutorials to students and professionals learning various Rhino 3D techniques. For more training course information that PJ Chen Design provides, Please visit our website at www.pjchendesign.com 👉 Share this video: https://youtu.be/BMoKZ-2JE2E 👉 Watch All FREE Video for Jewelry Design ►► https://goo.gl/aUPwz9 👉 Subscribe PJ Chen Design Channel ►► https://goo.gl/MJ4ExU 👉 Tell us what you like to learn about jewelry design ►► https://goo.gl/wAfJEJ ★☆★ If you found this video helpful, help me to spread the word by liking or commenting below. It helps me to reach more people and allow me to create more FREE videos! ★☆★ ✔ Like Our Facebook Page ►►https://www.facebook.com/pjchendesign/ ✔Visit Our Website ►► https://www.pjchendesign.com
Rhino 3d rhino cad design jewelry

How to Design a Lattice Shoe Sole: Step-by-Step Tutorial for Beginners

Hesam Soleimanzadeh
in Modeling
2 0 Intermediate
How to Design a Lattice Shoe Sole: Step-by-Step Tutorial for Beginners
Rhino grasshopper rhino footwear sole parametric shoe lattice

video bat beisball Rhinoceros tutorial Desing intro de Los Simpsons (jajaj) model 3d space travel

Matias Adrian Casciotta Gracia
in Modeling
1 0 Intermediate
A video where I model a baseball bat for a brand design contest. The Simpsons provide the introduction and the rest is a journey through digital cyberspace Jaja. I hope you like it! Hug! Un video donde modelo un bate de béisbol para un concurso del diseño de una marca. Los Simpson aportan la introducción y lo demás es un viaje por el ciberespacio digital Jaja. Espero les guste! Abrazo!
Rhino arquitecturadigital simpsons design space rhinoceros baseball bat modeling

How do i add thickness to a polyline in Rhinoceros 3D

Patel Deepak
in Design & CAD
1 1 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.
Rhino bending rhino wire

How to make animation or Gif files by simple print commands and print-screen Tab

Patel Deepak
in Design & CAD
1 2 Intermediate
GIF is the collection of pictures that are put together in the series to for animation, its like filming a blossoming flower, with all the patients, we have to keep taking pictures from same distance and angel with movements happening in the object or zooming in the uniform ratio.
Rhino gif rhino animation

Filling basic 6-sided holes in Rhino (ver. 2)

Bobi
in Modeling
1 0 Intermediate
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.
Rhino transition nurbs surfacing surface 6-sided hole blend rhino

Match surfaces manually

Bobi
in Modeling
1 0 Intermediate
One disturbing issue with "Match surface" is that it will try to transfer the 1st and 2nd row of control points to the target edge while keeping the distances between them relatively unchanged. This is usually great for the majority of users, because it's predictable and even usable in specific cases. However, there must be an option to "unclock" the aforementioned correlation between the 1st and 2nd row of control points and instead let "Match surface" adopt the same distances as the target control points. With that option turned on, the surface to be matched will become perfectly matched to the target one. To demonstrate the HUGE advantage of a potential "Adopt" option that I just described, here is a simple way to achieve the necessary correlation between the 1st and 2nd row of control points by "mirroring" the distances from the target surface to the opposite one. Lets hope that "McNeel" will consider adding such an option in the future releases of Rhino.
Rhino blend 3d cnc curvature tangent class-a surface match

Modeling of an inlet lip in Rhino 7

Bobi
in Modeling
1 0 Intermediate
P.S. At the end of my video you will notice that I forgot to improve the flow at the tip between the two split surfaces (easily seen on the curvature graph), which I did after I stopped with the video recording.
Rhino blend lip inlet air intake airplane wing surfacing rhino

Tutorial: How to make round diamond collet.

Patel Deepak
in Design & CAD
1 0 Intermediate
The series of jpegs will guide the way to make round collet
Rhino gem diamond rhino collet ring
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.