Tutorials

Modelling Plastic Cover in CATIA V5

Shahadatuliskandar Rosli
in Modeling
12 4 Beginner
In this tutorial, we will first create a shaft feature with thickness, in CATIA V5 using opened sketch. Then, we will apply a circular profile pad using 2 limits and add a concentric hole to it. Later, we will add a stiffener between the pad and the shaft created, and apply edge fillet all around it. Lastly, we will create a circular profile pocket and apply circular pattern around the shaft axis.
CATIA hole pocket pad thickness shaft pattern circular stiffener

Filling basic 6-sided holes in Rhino

Bobi
in Modeling
8 1 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.
Rhino rhino blend hole 6-sided surface surfacing nurbs transition

CATIA V5 - 2D into 3D Modeling - Exercise

Bocko Schuger
in Design & CAD
8 4 Beginner
In this guide are displayed CATIA V5 steps modeling based on technical drawings 2D into 3D modeling. With especially attention take a look the introduction of the new body which multiply holes, when the standard methods can not be used (mirrors, circular patterns ...).
CATIA v5 catia modeling 3d into 2d patern rectangular circural hole mrror pocket pad

Single Inspection Dimension for Holes

Stephen Nyberg
in Dimensioning / Tolerancing
6 1 Beginner
I was having a hard time figuring out a good way to dimension a hole with both the diameter and depth of a hole with GD&T in a singe dimension. This dimension also required inspection so I wanted the inspection circle around the dimension and have the properties linked to the model. I did a lot of searching on the internet and did not find a good solution. Here is my solution. please leave your comments if you have a better way to do this.
SOLIDWORKS gd-t hide-show annotations note drawing dimension hole inspection

SOLIDWORKS - Exercise: 2D into 3D Modeling - Part design training -

Bocko Schuger
in Modeling
6 0 Beginner
Please, look, how it looks this 2d drawing in 3D as a body, watching this video. https://youtu.be/Q8wlGo8aJUo Thanks.
SOLIDWORKS exercise basics solidworks modeling 3d into 2d thread with hole mirror plane boss extrude

2D into 3D Modeling - Part design training - SOLIDWORKS - Exercise

Bocko Schuger
in Modeling
5 2 Beginner
Look how it looks this 2d drawing in 3D as a body !
SOLIDWORKS extrude boss cut plane insert mirror chamfer holle hole with thread 2d into 3d modeling solidworks basics exercise

SolidWorks - Exercise - 2D into 3D Modeling - Extrude - Shall - Hole with thread - Fillet

Bocko Schuger
in Design & CAD
4 0 Beginner
In this guide are displayed SolidWorks steps modeling based on technical drawings 2D into 3D modeling. The 2D drawing is pump cover. Example of exercise/Part Design training. Basic features: Boss-Extrude, Shell, Mirror, Hole, Hole with thread, Circular Pattern, Rectangular Pattern, Fillet. Basic entities of the sketches: Line, Circle, Rectangle Fillet. Reference elements: Offset plane.
SOLIDWORKS solidworks linear pattern circular thread with hole mirror plane shall extrude

Make a shower drain with Flanged Hole

Maxime Chagnot
in Modeling
3 0 Beginner
https://youtu.be/gyzdFPjSGXc Here is a demonstration showing you the design of a shower drain grid in CATIA 3DExperience. The Sheet Metal Design application, based on industry process features, allows you to create quickly a plate that you can bend and add stamp, dowel, bridges, etc. This video is divided in two parts. First you see how to design the outer plate (using walls, flange and corner relief). The second part deals about the grid's design. In this Part, you will use GSD to create a repetition of points that will allows you to pattern the Flanged Hole Feature.
CATIA sheet grid shower drain hole flanged 3dexperience catia

(Video) SolidWorks Drafting Tutorial: Countersinks | Hole | Angle Bracket| Practice for Beginner | Tech Hawk

Tech Hawk
in Drafting
3 0 Beginner
In this tutorial, Tech Hawk is going to show you how to do a model of Angle Bracket. I've also showed you how to make Countersinks in a part. It will help beginners to practice different features of SolidWorks.
SOLIDWORKS drafting cad tutorial hole countersinks solidworks hawk tech

2D into 3D Modeling - Part design training - Autodesk INVENTOR - Exercise

Bocko Schuger
in Design & CAD
3 2 Beginner
Look how it looks this 2d drawing in 3D as a body !
Autodesk Inventor exercise basics inventor autodesk modeling 3d into 2d thread with hole holle chamfer mirror insert plane cut boss extrude

How does the hole wizard work?

Adam Pohl (POHL3D)
in Design & CAD
3 0 Beginner
Here's a brief write-up/rant.
SOLIDWORKS hole example wizard

Hexagonal Hole Button Bolt | Solidworks Tutorials

Henry
in Modeling
2 0 Beginner
Video: https://www.youtube.com/watch?v=hrL5HO8F5AE
SOLIDWORKS bolt button hole hexagonal tutorials solidworks

Extruded boss on the sphere - ADESK INVENTOR - Exercise - 2D into 3D Modeling

Bocko Schuger
in Design & CAD
2 2 Beginner
In this guide are displayed ADESK INVENTOR steps that are required for extruded boss to the sphere surface and modeling of the overall model based on technical drawings. 2D into 3D solid modeling. Example of exercise.
Autodesk Inventor inventor autodesk thread with hole surface tangent plane boss sphere extruded

How to Make Countersink Holes in SolidWorks using Hole Wizard Command

Usman Akhtar
in Modeling
1 0 Beginner
In this SolidWorks video tutorial you will learn how to make Counter Sink hole in solidworks. for that I will tell you how to use hole wizard command in solidworks.
SOLIDWORKS hole countersink

SOLIDWORKS Tutorial For Beginners| Rib | Hole Wizard | Solidworks Evaluate | 3D Dimensions | CADable

Ibrahim Omer
in Modeling
1 0 Beginner
Hi welcome back to CADable. Here I am starting a new playlist related to basic tutorials of SOLIDWORKS. This is the 8th tutorial of this playlist. This exercise was asked by one of my subscriber. It is a good exercise for beginners and it will be a good practice for beginners. In this tutorial, we will learn these commands: 1) Basic 2D Commands 2) Rectangle, Slot, Trim 3) Extruded Boss 4) Extruded Cut 5) Fillet 6) Hole Wizard 7) Color / Appearance 8) 3D Dimensions 9) Evaluate Kindly use play pause technique for practice. I have attached files in the description for practice. Feel free to ask your queries in comment section. I will try to answer each and every question. Keep practicing as practice makes a man perfect. For Files: https://grabcad.com/library/practice-exercise-8-1 #solidworksbasicexercise #solidworksbeginners #CADable #solidworksevaluate #solidworksrib #solidworkstutorials2020 Follow our Channel: https://www.youtube.com/c/CADable​
SOLIDWORKS modeling 3d wizard hole cut extrude evaluate rib tutorials solidworks2020 cadable beginners tutorial solidworks
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.