Tutorials

CATIA v5 Reconstruction using surfaces of an incorrect connection area

Ghionea Ionut
in Modeling
5 1 Intermediate
CATIA v5 Reconstruction using surfaces of an incorrect connection area Video tutorial by Ionut Ghionea www.catia.ro www.fiir.pub.ro University Politehnica of Bucharest, Romania CATIA Part Design Specialist CATIA Champion https://play.google.com/store/books/author?id=Ionut+Gabriel+GHIONEA
CATIA reconstruction area connection v5 catia fill surface round

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
4 0 Intermediate
Finishing strategies machine the actual component form and where applicable, follow on from the Area Clearance operation. Suitable values are required to control the accuracy and amount of excess material to be left on a component by a tool path. The parameters used for this purpose are called Thickness and Tolerance
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
2 0 Intermediate
Raster, Radial, Spiral, and Pattern Finishing. Introduction. This section will cover Finishing strategies created by the downward projection of a Pattern, which include four types, Raster, Radial, Spiral and (user defined) Pattern. PowerMILL generates the toolpaths by projecting a wireframe form down the Z-axis onto the model. The standard patterns applied in Raster, Radial, and Spiral are achieved by entering values directly into the Finishing Form. The resultant Pattern can be displayed by selecting Preview before executing the command by selecting Apply. The Pattern option requires a user-defined geometric form (active Pattern), which is projected down Z onto the model as a tool path.
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

Extracting Outer Surface Area Parameter for the Drawing | Creo Parametric

Kulbir Sandhu
in Assemblies
1 0 Intermediate
In the design process, when outer surface area is required for coating treatment for set of assembly parts, SHRINKWRAP technique can be useful as described in this video.
PTC Creo Parametric design structure technique modelling creo drawing coat parameter area surface outer shrinkwrap

How to loft cut the area between two sketches to the area between another two sketches

Stephen Nyberg
in Design & CAD
0 0 Intermediate
I found the easiest way to do this was to use the revolve cut feature rather than the loft cut. Here is video to show you what I did and some screen shots.
SOLIDWORKS extrude sweep cut loft area jet engine

How to Find Center of Mass | Get Projected Area | Siemens NX

Shuvam Kumar
in Modeling
0 0 Intermediate
In this video, you will learn to create the center of gravity or center of mass point which will link to our solid model if our model is updated then our center of gravity point will also update automatically. After that we will learn to calculate the projected area of Casting in nx and also learn to extract the projected surface. After that we will project the center of gravity point into the projected surface so that we will get point which we use for tie bar balance in Die Casting During Die Design. Projected sheet and projected in area will help us in Tonnage Calculation in die-casting. I hope you got to learn a lot from this video. If you want to watch NX tutorial and die-casting related videos from our channel then please subscribe to our channel ➡️https://bit.ly/2Ve1olC To Subscribe ➡️Recommended Playlist Die Casting Mould Design Theory ➡️https://youtube.com/playlist?list=PLqn1PG9MY7LjK08RSkCBC1jfdRYcR-BqU Die Casting Mold Base Design Step By Step | NX Mold Design ➡️https://youtube.com/playlist?
NX Unigraphics design cad master become calculation how object mass find gravity center nx casting area projected
White Stratasys Logo White GrabCAD Logo
© 2026 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.