Tutorials

Small

Tutorial - Modeling rope in Creo Elements aka Pro/E

2 0 Beginner
Steps for creating a rope in creo parametric 1.0
Small

Tutorial - Making text emboss on the curved surface in Creo Elements/Pro aka Pro Engineer Wildfire?

2 0 Beginner
Here is the tutorial.
Small

Tutorial - Modeling rope in Creo Elements aka Pro/E

1 0 Beginner
For making simple bended rope we have to follow these steps. 1 Make 4 cylinderical extrusions. 2 Twist them. 3 Bend them.
Small

Tutorial - Modeling Bolt with terminating thread in Creo Elements aka Pro/E?

1 0 Beginner
Here is the tutorial.
Missing small

How to convert a CAD file to an STL file?

1 0 Intermediate
STL is the standard file type used by most or all rapid prototyping systems. A STL is a triangulated representation of a 3D CAD model (figure 1). The triangulation of a surface will cause faceting of the 3D model. The parameters used for outputting a STL will affect how much faceting occurs (figure 2 and 3). You cannot build the model any better or smoother than the STL file, so if the STL is coarse and faceted, that is what you can expect in the final model. In the CAD package, when exporting to STL, you may see parameters for chord height, deviation, angle tolerance, or something similar. These are the parameters that affect the faceting of the STL.You don’t necessarily want to go too small. The finer the STL the larger the file is in size, which will affect processing time in Insight as well as build time. Below is some information found on the Internet regarding exporting to STL from various CAD packages.
Small

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

1 0 Beginner
Here is the tutorial.
Small

Tutorial - Modeling Twisted cutter in Creo Elements aka Pro/E?

1 0 Beginner
Here is the tutorial.
Small

Tutorial - Creating Conic surfaces using shoulder curves in Creo Elements/Pro aka Pro Engineer Wildfire?

1 0 Beginner
Here is the Tutorial.
Small

Tutorial - Helical Sweep in Creo Elements/Pro aka Pro Engineer Wildfire?

1 0 Beginner
Here is the tutorial.
Small

Tutorial - Spine feature in Creo Elements aka Pro/E?

1 0 Beginner
Here is the tutorial.
Small

Tutorial - Twist feature in Creo Elements aka Pro Engineer?

1 0 Beginner
Here is the tutorial.
Small

Tutorial - Analyzing the rod for von-mises stress using Mechanica in Creo Elements/Pro?

1 0 Beginner
Here is the tutorial.
Small

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 1?

0 0 Beginner
Here is the Tutorial.
Small

Make Logo With Pro-E Wildfire 4.

0 0 Beginner
Video is to demonstrate how to make logo with Pro-E Wildfire 4. (Speed Video)
Small

Tutorial - Inserting picture on sketch in Creo Element/Pro aka Pro Engineer Wildfire?

0 0 Beginner
Here is the tutorial